MSD 6AL Digital Ignition Box With Rev Limiter
- Compatible W/4,6 & 8 Cylinders
- Adjustable RPM Limiter
- Soft Touch Rev Control
- Up To 15,000RPM Rev Range
MSD 6AL Ignition Box with Rev Limiter for use with a Distributor.
Whether you have a powerful street machine, hard working truck or trick street rod, the powerful multiple sparks of the MSD 6AL will ensure complete combustion. Benefits such as quicker ETs, easier starting, reduced plug fouling, more power and even increased fuel economy can be expected with the 6AL's high energy multiple sparks. Like all of the MSD 6 Series Ignitions, the 6AL will work with virtually any vehicle as long as it has a 12-18 volt electrical system.
The Digital 6AL has a microprocessor that monitors and controls every firing and rev limit. All wiring is routed through one end of the unit through a sealed and locking connector. The rev limiter is located on top of the housing for easy access to the two rotary dials to set the limit in 100 rpm increments. The wiring harness, vibration mounts, and components you'll need for installation are included.
-Soft Touch Rev Control
-Efficient components use less current to product more power
-Set an RPM limit with two rotary dials
-Built-in LED for system checks
-Compatible with 4, 6, or 8-cylinder engines with 12-volt, negative ground electrical systems
-Accepts trigger inputs from breaker points, amplifiers, and magnetic pickups
-Spark Energy - 135-145mJ per spark
-Primary Voltage - 520-540 Volts
-Secondary Voltage - 45,000 Volts
-Spark Series Duration - 20 degree Crankshaft Rotation
-RPM Range - 15,000 RPM with 14.4 Volts
-Voltage Required - 12-15 Volts, 7 Volt Start
-Current Draw - .7 Amp per 1,000 RPM
-Weight and Size - 1.7 lbs., 8" L x 4" W x 1.825" H
Go ahead and purchase this all-new MSD 6AL Ignition Box with Rev Limiter for your vehicle with a Distributor now from CJ Pony Parts!
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.
The 6AL also has a soft-touch rev limiter which is going to drop spark to individual cylinders within one percent of the desired RPM. The MSD digital 6AL comes with everything necessary for installation. It comes with a harness to tie into a MSD distributor, separate harness if you're tying into your factory ignition system, and all the necessary hardware as well. The MSD digital 6AL is an excellent choice if you're looking for more performance from the ignition of your '64 through 1995 Mustang.
This product will fit the following C10 years:
This product will fit the following Mustang years: