Drake Muscle Cars Differential Girdle Aluminum 8.8" Rear-Axle 1986-2014

Drake Muscle Cars:
80% of 100


  • Aluminum Differential Girdle
  • Provides Bearing Cap Support
  • Hardware Included
  • Durable Construction
MSRP $200.00
You save 10%

Drake Muscle Cars Aluminum Differential Girdle for 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs with an 8.8" Rear-Axle.

Are you looking to add a mod to your Mustang’s rear-axle to keep it in good condition? You might want to add a differential girdle to keep its housing from distorting, and its main caps from walking or distorting. CJ Pony Parts carries a high-quality, Drake Muscle Cars 5R3Z-4033-B Aluminum Differential Girdle for most 1986-2014 Mustangs with an 8.8” Rear-Axle. Order your own today and add this mod to your Mustang to make your life simpler.

- (1) Aluminum differential girdle for 8.8” rear-axles
- (20)-piece hardware set

This high-quality, Drake Muscle Cars aftermarket product is made from hardy cast-aluminum and includes a differential girdle for Mustangs with an 8.8-inch rear-axle and a 20-piece hardware set. Its heightened-strength helps keep your Mustang’s rear-axle housing from becoming distorted. The load bolts keep the main differential caps from walking or distorting and the fill plug saves you from the hassle of having to fill from the front of the rear axle. This product also features a magnetic drain plug and a slim design to allow for clearing of most panhard bars.

Please Note: Includes everything necessary for installation except a differential cover gasket (RDS55341), sold separately at CJ Pony Parts.

*This differential girdle fits all 1986-2014 V8 and 2011-2014 V6 Mustangs except 1999-2004 Cobras with IRS, 2012+ Boss 302 or gear sets higher than 4.11.

Scott Drake has become an iconic brand, redefining quality for reproduction and aftermarket Mustang parts from 1964 to present Mustangs. CJ Pony Parts offers a wide variety of Scott Drake parts, which have become so popular that many customers ask for the brand by name. Once you try their parts on your Mustang, we're sure you will, too.

Order a Drake Muscle Cars 5R3Z-4033-B Aluminum Differential Girdle for your 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 Mustang with an 8.8" Rear Axle from CJ Pony Parts!

California Residents: Proposition 65 Warning

Installation Difficulty


Intermediate skill is required for this installation.

Installation Videos

Video Transcript

We're here with Drake Muscle Cars 8.8-inch Differential Girdle. The Differential Girdle is an excellent upgrade for your street or race car, or pretty much any Mustang using an 8.8-inch solid rear-axle assembly. The Differential Girdle features beefy, cast-aluminum construction to keep the housing from deflecting under load. It has a fill plug in the top and a magnetic drain plug at the bottom. The center section is nice and low-profile, so there's no issues with clearance with a panhard bar. It also includes these main support caps. They thread through the girdle and put pressure on the caps to keep them from deflecting under load as well.

Scott Drake includes all hardware needed for installation. We recommend using RTV sealant in place of gasket when installing the Differential Girdle. We found it gives you a much better seal. This girdle's going to fit any '86 through a current Mustang, with the exception of the '99 through '04 Cobra.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account