Edelbrock Cylinder Head Performer RPM 170cc 1.90" Intake/60cc 1.60" Exhaust 289/302/351W
- Port Volume: 170Cc/60Cc
- Provides Excellent Power
- Roller Rocker Valve Springs
- Made In The USA
Edelbrock 170cc/60cc Performer RPM Cylinder Head with 1.90" Intake and 1.60" Exhaust Valve Diameters for 289, 302 and 351W Engines.
If you've been looking to upgrade some parts and pieces in your 289, 302 or 351W engine but still maintain stock pistons, than you'll definitely need this Edelbrock Stud Mount Performer RPM Cylinder Head (60225), now available to purchase here at CJ Pony Parts!
Performer RPM Cylinder Head Specs and Dimensions:
- Combustion chamber volume: 60cc
- Intake runner volume: 170cc
- Exhaust runner volume: 60cc
- Intake valve diameter: 1.90"
- Exhaust valve diameter: 1.60"
- Valve stem diameter: 11/32"
- Valve guides: Manganese bronze
- Deck thickness: 5/8"
- Valve spring diameter: 1.460"
- Valve spring maximum lift: .575"
- Rocker stud: 3/8"
- Guideplate: Hardended steel
- Pushrod diameter: 5/16"
- Valve angle: 20°
- Exhaust port location: Stock
- Spark plug fitment: 14mm x 3/4 reach, gasket seat
Edelbrock understands that you want as many options as possible when it comes to upgrading or customizing your Ford vehicle, so that's why they developed this RPM Performer Cylinder Head! It's a direct-fit for your small block Ford engine and will provide anywhere between 1500 and 6500 RPM. Since Edelbrock uses valve springs on this head, it makes this cylinder head ideal for mechanical flat tappet and hydraulic roller camshaft applications. Be sure you grab two for your vehicle today from CJ's!
*Will NOT accept Rail Rockers.
*Sold individually--two needed per vehicle.
Please Note: When you install this Performer RPM Cylinder Head on a 289 or 302 Engine you will need to purchase Edelbrock Head Bolt Bushings (EDL9680).
If you're looking for more performance from your Ford Engine, check out Edelbrock, who is one of the industry leaders with parts for most Ford Engines and more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your Small Block Ford with high quality performance products.
Pick up this brand-new Edelbrock (60225) 170cc/60cc Performer RPM Cylinder Head with 1.90" Intake and 1.60" Exhaust Valve Diameters for your 289, 302 or 351W Engine today from CJ Pony Parts!
California Residents: Proposition 65 Warning
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
This product will fit the following Bronco years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: