Edelbrock Cylinder Head Victor Jr. With Valves Small Block Ford 289-351W

Give your race-ready Small Block Ford 289-351W Engine a competitive edge with this 20-degree Victor Jr. Cylinder Head (77179) with Valves. This Edelbrock creation boasts a walloping 500+ horsepower potential straight out-of-the-box using stock valve train geometry.

Features and Benefits:
- Aluminum Construction 
- Compatible with OE Valve Train and Pistons
- 500+ Horsepower Potential 
- High-flowing 210cc Intake Ports
- .130" Raised 75cc Exhaust Ports 
- Available with 60cc Combustion Chambers
- CNC Gasket-Matched Port Entries/Exits with Blended Valve Bowls

The Victor Jr. Small Block Ford Cylinder Head is compatible with the OE valve train and pistons for an easy bolt-on fitment. The spark plug holes and valves are situated in the stock location while the valve cover rail is raised .150 inches. Thanks to a relief in the head, you will be able to change most roller lifters without removing the heads. 

Specifications: 
- CNC Ported: No
- Combustion Chamber Volume: 60.0 cc
- Deck Height: 9.5 in
- Deck Thickness: 0.625 in
- Exhaust Valve Diameter: 1.600 in
- Guide Plates Included: Yes
- Intake Runner Volume: 210.0 cc
- Exhaust Runner Volume: 75cc
- Push Rod Diameter: 0.312 in
- Rocker Stud Diameter: 0.437 in
- Valve Angle: 20 Degree
- Valve Stem Diameter: 0.341 in

The part is equipped with high-flowing 210cc intake ports and .130-inch raised 75cc exhaust ports. Lastly, the part features a 60cc combustion chamber to meet the needs of your application. To maximize horsepower and RPM at an affordable price, mount the Victor Jr. Cylinder Head to your ultra-high performance street engine.

Tech Tips: 
- Check cam manufacturer's specs for compatibility with valve springs. Recommended valve sizes listed.
- Match with Edelbrock head gasket sets.
- Use Head Bolt Kits for easy installation.

Please Note: These heads require the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat range appropriate to your application.