Ford Racing Hydraulic Roller Valve Replacement Spring Kit of (8) M-6049-SCJA Cylinder Heads
Highlights
- Set of Eight (8) Valve Springs
- One of Two Kits Needed
- Maximum lift = .700"
- Made in the USA
Ford Racing Kit of (8) Replacement Hydraulic Roller Valve Springs for M-6049-SCJA Cylinder Heads.
Ford Racing designed this Hydraulic Roller Valve Replacement Spring Kit to directly fit your vehicle's M-6049-SCJA Cylinder Heads. These springs offer a closed seat pressure of 135lbs at 1.850" and an open pressure of 365lbs at 1.250". The springs also provide a maximum lift of .700". The springs are sold as a set of eight, so two sets are needed for both heads in your vehicle's engine. This spring kit is made right here in the USA.
Features & Benefits:
- Contains a Full Set of Eight (8) Valve Springs
- Closed Seat Pressure 135lbs at 1.850"
- Open Seat Pressure 365lbs at 1.250"
- Maximum lift = .700"
- Made in the USA
Vehicle Fitment:
- 1965-1995 Mustang
- 1966-1977 Bronco
- 1948-1979 F-100
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Ford Bronco Parts, Ford F-100 Parts, Bronco Engine
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
