Ford Performance Rocker Arm Channel Kit 5.0/5.8

Ford Performance: M-6588-A50
CJ's Low Price:
$27.75
1508630400 24070
Earn 27 RPM Points What's this?
Ford Performance Rocker Arm Channel Kit 5.0/5.8
Ford Performance

Product Description

Ford Performance Rocker Arm Channel Kit for 302 and 351W Engines with Pedestal Style Rocker Arms.

When you need an excellent rocker arm channel kit for your 302 or 351W engine with pedestal style rocker arms, take a look at this kit from Ford Performance!

Features & Benefits:
- Fits Factory and Cast Iron GT-40 Style Cylinder Heads
- Fits All Production Stamped Steel and Ford Performance Bolt-On Rocker Arms
- Designed to Tie Two Rocker Arms Together for Proper Alignment
- Prevents Excessive Side-to-Side Movement of the Rocker Tip on the Valve
- Keeps Your Custom Modifications from Damaging Your Head or Block
- Made in the USA
- Sold in a Set of Eight (8)

This Ford Performance M-6588-A50 Rocker Arm Channel Kit fits factory and cast iron GT-40 style cylinder heads and all production stamped steel and Ford Performance bolt-on rocker arms. They're designed to tie two rocker arms together for proper alignment, and they help prevent excessive side-to-side movement of the rocker tip on the valve. This rocker arm channel kit will also help keep your custom mods from damaging your head or block. These parts are proudly made in the USA, you'll get 8 in your order.

*This rocker arm channel kit will also work on 1966-1977 Broncos.

By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years.

Order a Ford Performance M-6588-A50 Rocker Arm Channel Kit for your 302 or 351W Engine with Pedestal Style Rocker Arms from CJ Pony Parts today!

Similar Bronco Parts

similar Bronco parts More Engine  

Installation Instructions

Mustang Installation

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 128.15ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

These channel pieces, do they just slip over the push rods of each cylinder, than lay on the head. Do they flop around. Could you explain how they work. Thank You

Asked by: northern bill
They fit under the pedestal of the rocker on heads equipped with pedestal style rockers.
Answered by: rk cjpp
Date published: 2017-02-28
  • y_2017, m_10, d_21, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_M6588A50, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 35.06ms
  • QUESTIONS, PRODUCT

You Might Also Like