K&N Oil Filter Mustang 1965-1995/Bronco 1966-1977
Highlights
- Wrench Off Oil Filter
- High Flow Media Trap
- Heavy Duty Steel Canister
- Performance Upgrade
K&N Oil Filter for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995 Mustangs and all 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and 1977 Broncos.
When was the last time you swapped out your oil filter in your 1965-1996 Mustang or 1966-1977 Bronco? If you can’t remember, it might be time to install a new one. Clean motor oil is important, because unfiltered oil becomes inundated with foreign contaminants, which can damage your engine over time. CJ Pony Parts carries a K&N HP-3001 Oil Filter, which fits on most 1965-1996 Mustangs and all 1966-1977 Broncos. Order one for yourself and keep your motor oil clean and debris-free!
This K&N FL-1A fitment, canister-style oil filter was originally designed for race applications to handle higher oil pressures without overflowing. Its premium, filter media is made with resin-infused, cellulose material for maximum flow while preventing 99% of dangerous, foreign contaminants from getting into your engine. This oil filter features an anti-drain-back valve, which eliminates dry starts, preventing oil from draining back into the crankcase during engine shutdown. It has thicker canister walls than most other oil filters, providing extra strength and durability. The oil filter is equipped with a heavy-duty base plate with a double-rolled seal and a pre-lubed base seal. Its durable construction reduces the risk of damage from loose rocks and other fragments.
This K&N, direct-fit replacement oil filter is easily installed on most 1965-1995 Mustangs and all 1966-1977 Broncos. To install, simply remove your previous oil filter and replace it with your new, K&N oil filter. Removal is even easier. This oil filter includes a 1-inch, exposed nut, which is welded to the top of the oil canister for easy, wrench-off removal. A drilled hole on the hex nut allows for attachment of a safety wire.
Please Note: This oil filter works well with both standard and synthetic engine oils.
*This oil filter fits all 1966-1977 Broncos and all 1965-1995 Mustangs except 1994-1995 V6s, 1984-1986 SVO Turbos and 1993-1995 Cobras.
Order a K&N HP-3001 Oil Filter for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 or 1995 Mustang or your 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 or 1977 Bronco from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Mustang Oil System, Ford Bronco Parts, Bronco Engine
Installation Videos
Video Transcript
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following Mustang years: