Edelbrock Cylinder Head E-Series E-205 205cc 2.08" Intake/60cc 1.60" Exhaust Pair For Mechanical Flat Tappet/Hydraulic Roller Camshaft 289/302/351W



  • 60Cc Combustion Chamber
  • 2.08/1.60 Intake/Exhaust Valve
  • 205CC Intake Runner
  • Maximum Lift: .650"

Pair of Edelbrock 205cc/60cc E-Series E-205 Cylinder Heads with 2.08" Intake and 1.60" Exhaust Valve Diameters for 289, 302 and 351W Engines with Mechanical Flat Tappet or Hydraulic Roller Camshafts.

If you want to increase the power in your 289, 302 or 351W engine without spending a fortune, than swapping the lame stock cylinder heads for these Edelbrock E-Series E-205 Cylinder Heads (5027) is a must! Order your new pair of cylinder heads today from CJ Pony Parts!

E-Series E-205 Cylinder Head Specs:
- Combustion chamber volume: 60cc
- Intake runner volume: 205cc
- Exhaust runner volume: 62cc
- Intake valve diameter: 2.08"
- Exhaust valve diameter: 1.60"
- Valve stem diameter: 11/32"
- Valve guides: Manganese Bronze
- Deck thickness: 5/8"
- Valve spring diameter: 1.46"
- Valve spring maximum lift: .575"(5028) / .650"(5027)
- Rocker stud: 3/8"
- Guideplate: Hardened steel
- Pushrod diameter: 5/16"
- Valve angle: 20°
- Exhaust port location: Stock
- Spark plug fitment: 14mm x 3/4 reach, gasket seat
- Installed Height: 1.900"
- Seated Pressure: 145 lbs.
- Open Pressure: 380 lbs. @ .600" lift
- Max Valve Lift: .650"

If you've been searching high and low for the perfect cylinder heads to take your small block Ford engine to the next performance level, than these Edelbrock E-series E-205 Cylinder Heads are just what you need! These high-quality heads are direct-fit replacements for your engine's originals that have broken-down over the years. They're manufactured to provide race-level performance while still being fully compatible with other OEM equipment, so you don't necessarily need to upgrade other engine components to get the power you crave. The larger runners in these cylinder heads provide increased airflow and revised exhaust ports, making them ideal for any larger displacement engines.The E-Series heads are capable of supporting more than 500HP (naturally aspirated) and can provide even more horsepower in forced induction applications. Why wait a moment longer? Go ahead and grab your cylinder heads from CJ's today!

Valve  Lift    .100"  .200"  .300"  .400"  .500"  .600"  .700"
Intake    65  128   179   223   253   267   277
Exhaust    57   96   128   155   168   175   180

*Will NOT accept Rail Rockers.
*Sold as a complete pair of two (2) cylinder heads.
*These cylinder heads are only compatible with mechanical Flat Tappet and Hydraulic Roller Camshafts

Please Note: When you install a pair of E-series E-205 Cylinder Heads on a 289 or 302 Engine you will need to purchase Edelbrock Head Bolt Bushings (EDL9680).

If you're looking for more performance from your Ford Engine, check out Edelbrock, who is one of the industry leaders with parts for most Ford Engines and more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your Small Block Ford with high quality performance products.

Pick up this brand-new Pair of Edelbrock 205cc/60cc E-Series E-205 Cylinder Heads (5027) with 2.08" Intake and 1.60" Exhaust Valve Diameters for your 289, 302 or 351W engine with a Mechanical Flat Tappet or Hydraulic Roller Camshaft from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-100 years:

  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.