Edelbrock Intake Manifold Super Victor 8.2 EFI Satin 289/302
Highlights
- 8.2" Deck Height
- 4500 To 8500 RPM Range
- Single-Plane Design
- Satin Finish
Edelbrock Super Victor 8.2 Satin EFI Intake Manifold for 289 and 302 Engines.
If your 289 or 302 high RPM, competition engine needs a new intake manifold that can keep up, it’s time to order this Edelbrock Super Victor 8.2 Satin EFI Intake Manifold that’s now available from CJ Pony Parts!
Features & Benefits:
- Designed for High RPM and Competition 289 and 302 Engines with Aftermarket Windsor-Style Racing Cylinder Heads
- For Engines with 8.2" Deck Height
- Great Choice Large Displacement Drag Racing Engines
- Single-Plane with Satin Finish
- Improved Torque Over Wide RPM Range: Delivers Big Power Gains from 4500 to 8500 RPM
- Includes Nitrous and Rear Cooling Water Bosses
- Square-Bore Carburetor Pad Stands .850" Taller Than Edelbrock Victor Jr.
- Air-Gap Design Separates Intake Runners from Hot Engine: Cooler, Denser Charge for More Power
This Edelbrock (29285) Super Victor 8.2 Satin EFI Intake Manifold is designed for high RPM and competition 289 and 302 engines that have aftermarket Windsor-style racing cylinder heads, and it’s also designed for engines with an 8.2" deck height. This makes it a great choice for vehicles with a large displacement drag race engine, and it features a single-plane design with a great-looking satin finish. You’ll see an improvement in torque over a wide RPM range, and this intake manifold's air-gap design separates the intake runners from the hot engine, resulting in a cooler and denser charge for more power! It also comes with nitrous and rear cooling water bosses.
Intake Manifold Specs:
Front Intake Manifold Height: 6.35"
Rear Intake Manifold Height: 6.35"
*This intake manifold is NOT equipped with EGR.
Please Note: Mounting hardware and gaskets are NOT included.
Order an Edelbrock (29285) Super Victor 8.2 Satin EFI Intake Manifold for your 289 or 302 Engine from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Mustang Intake Manifolds, Mustang EFI Manifolds, Ford Bronco Parts
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following F-100 years:
This product will fit the following Mustang years:
