Ford Racing Sealed Crate Engine 347" CU. 415HP Rear Sump
Highlights
- All Forged Internals
- 347 Cubic Inches
- Sealed Crate Engine
- For Racing Applications
Ford Racing Rear Sump 415 Horsepower 347 Cubic Inch Sealed Crate Engine.
This Ford Racing D347SR7 engine (M-6007-D347SR7) has winning power right out of the crate. With lightweight 7MM valves, this 347 has all of the latest developments and improvements from Ford Racing testing, with feedback from racers and engine builders coast to coast.
Features and Benefits:
- Designed and assembled by Ford Racing
- Designed for circle and dirt track
- Sealed for homologation purposes
- Competes directly with the GMPP 604 crate engine
This engine was built for asphalt and dirt circle track racing series that require a sealed racing engine. It is capable of continuous high RPM without power loss. It features all-forged internals, professionally assembled by Ford Racing.
Specifications:
- 347 cubic inches - 4.030" bore - 3.400" stroke
- BOSS 302 race block
- 415 hp @ 6000 rpm 400 lb-ft @ 4900 rpm (with headers and a 650 CFM Holley carburetor, not included)
- 10:1 Compression ratio (nominal)
- SCAT forged crankshaft
- SCAT forged steel cap screw connecting rods
- Mahle forged pistons with floating pins
- Hydraulic roller camshaft M-6250-F303, .528'' lift intake and exhaust, duration at .050" is 226 degrees intake and exhaust
- Double roller timing chain set M-6268-A302
- High-performance 7 quart rear sump circle track oil pan
- Ford Racing aluminum "Z" cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves
- PAC 1219X ovate beehive valve springs
- 1.65:1 ratio roller rocker arms
- Edelbrock Victor Jr. intake manifold M-9424-D302
- Edelbrock Water Pump
- SFI approved vibration damper
- MSD billet distributor
- ARP Head Studs
- "Ford Racing" polished aluminum Circle Track valve covers M-6582-CT2
- Ford Racing M-6600-D2 High volume oil pump
- Engine weight as equipped is 431 lbs. (includes 7 quarts of oil)
- Engine is internally balanced, "0" balance flywheel required
- Fuel pump eccentric M-6287-B302 installed, allows use of a mechanical fuel pump
- A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers
- Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order)
- Race Application: No Warranty
Please Note: Flywheel is not included
Tech Tip: Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required.
California Residents: Proposition 65 Warning
Related Categories: Mustang Crate Engines & Cylinder Blocks, Bronco Crate Engines & Cylinder Blocks, F-100 Crate Engines & Engine Blocks
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
truck_freight_flat_product Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
