Holley Super Sniper 2 Black 4150 Flange EFI PDM Kit with Master Fuel Kit Small-Block Ford Engines

Upgrade your engine's performance with the Holley Sniper 2 EFI bundle (550-511-BPK-SBF). This top-tier PDM kit is perfect for accentuating your small-block Ford’s power. It’s capable of supporting 650 naturally aspirated HP or 575 HP on boost. Four wiring connections simplify the complex EFI installation process. To address common problems like RF noise and interference, the ECU uses a next-gen design.

Features and Benefits:
- Black 4150 flange throttle body
- Supports up to 650 naturally aspirated HP, 575 HP on a boost
- Four 100 lb./hr. injectors for tremendous power potential
- Simple installation requiring just four connections
- Advanced ECU with superior RF noise resistance
- Centralized EFI and ignition wiring
- Effortless connection with positive lock connectors
- Distributes conditioned power to EFI fuel pump and single fan
- Two additional low-current circuits for accessories like gauges
- Power by only battery and a switched 12V source
- Wireless tuning and real-time engine monitoring via smartphone
- Compatible with iOS and Android devices
- Extensive tunability and customizability of engine parameters
- Convenience of making adjustments without a laptop
- Built-in Sniper EFI wizard, advanced tuning, and data monitoring
- Seamlessly integrates with existing and fresh Sniper EFI systems
- High-efficiency spark energy delivery enhancing performance
- Operates on 7 to 28-volt electrical systems
- Fully protected against open coil, shorted coil, and open load
- Plug-and-play installation
- Hall Effect crank trigger sensor housing provides quiet RPM signal to ECU
- Billet distributor housing provides corrosion resistance and stylish looks
- Distributor shutter wheel is pinned and welded to the shaft for longevity

This kit promotes full protection against shortages and is energy efficient. Everything needed for installation is included. Wireless tuning and real-time engine monitoring are available via Bluetooth for greater convenience.

Specifications:
- CFM: 800
- Fuel pressure: 58.5 PSI
- Height: 3.28"
- Injector size: 100 lb./hr. @ 58.5 PSI
- Inlet/outlet size: 9/16”-18 female O-ring (-6AN)
- MAP sensor: 2Bar
- Max horsepower rating: 650 naturally aspirated
- Transmission: all

Master In-Line Kit Fuel Kit Includes:
- 20’ of 3/8” Vapor Guard fuel hose
- Bulkhead fitting to return fuel into the tank
- Fuel pump
- Fuel pressure regulator
- Installation hardware

Vehicle Fitment:
- 1965-1995 Ford Mustangs
- 1966-1977 Ford Broncos
- 1948-1979 Ford F-100s
- Fits small-block 260, 289, and 302 Ford engines