McLeod Aluminum Flywheel 157 Tooth 0oz With 28oz/50oz Weights Manual Trans Small Block Ford 1965-1995
- 157 Tooth Flywheel
- Aluminum Construction
- Replaceable Friction Plate
- Fits All Small Block Fords
McLeod 6-Bolt 157-Tooth Aluminum Flywheel with 28oz. and 50oz. Counterweights for Manual Transmission Equipped 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289, 302 or 351 Engine and 1981, 1982, 1983, 1984 and 1985 Mustangs with a 302 Engine and 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995 Mustangs with a 5.0L Engine.
The McLeod Aluminum Flywheel (563100) is ideal for all sorts of small block Fords – including yours! Supporting a range of power from stock to full race engines, this flywheel carries an SFI Certified 1.1 Safety Rating. It is designed to provide smooth operation for all 5.0L's including high horsepower and high revving motors. No matter the generation of Mustang, if yours has a 302 or 5.0 small block, this flywheel is compatible.
Features And Benefits:
- 157-Tooth Aluminum Flywheel
- 50oz. Counterweight
- 28oz. Counterweight
- Counterweight Installation Hardware
- Dowel Pins for 0oz. Balance
Whether it’s stroked, boosted, fully built or completely stock, your Small Block Ford stands to benefit from the rapid throttle response an aluminum flywheel provides. McLeod is a leading global supplier of clutch kits, clutch components, hydraulic bearings, flywheels, bellhousings and other performance products. For the 5.0 or 302 V8 in your Mustang, this McLeod Aluminum Flywheel is Made in the USA, CNC machined from 6061 T6 aluminum and comes with a replaceable steel friction plate as well as a 1045 steel hardened ring gear. Wake up your Windsor with McLeod and achieve that snappy throttle response only an aluminum flywheel can provide.
- 1965-1973 Mustangs with a 289, 302 or 351 Engine
- 1981-1985 Mustangs with a 302 Engine
- 1986-1995 Mustangs with a 5.0L Engine
- Fits Manual Transmissions only; not designed for use with Automatic Transmissions.
Tech Tip: This Flywheel can be used in 3 different configurations (depending on the vehicle) with the included counterweights, dowel pins and hardware. 0oz. for Internal Balance applications and 28oz. or 50oz. for External Balance applications.
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.