Eastwood 12 Ounce Aerosol Can of Silver Cad.Spray-on the realistic look of silver cadmium plating. The easy-to-apply, single-step Silver Cad aerosol recreates the look of actual cadmium plating.
Eastwood's Silver Cad Aerosol faithfully replicates the special bluish-silver tint of the original cadmium plating used on many engine and transmission parts. Perfect for underhood and under-car components like coil clamps, alternator pulleys, carburetor and transmission linkage rods, and more. Withstands up to 250 degreesF.
*12 ounce can covers about 6 square feet.
Product ReviewsWrite a review
Eastwood Silver Cad 12Oz. Aerosol Can is rated out of 5 by 12.
Rated 5 out of 5 by curtis8 from OE type of look for little money Purchased 2 cans to help with cleaning up a 1949 Indian model 149 motorcycle. This machine has the original factory paint, but many of the cad plated parts had the coating worn off in many places or in poor shape. The Eastwood cad paint was very close, not exact, but very convincing in appearance. It really made the bike look nice. On this model machine, even the wheels were cad plated, and I got quite a bit of coverage out of 2 cans, and I still have some left for touch up of bolt heads etc. Thanks Eastwood.
Date published: 2016-07-24
Rated 5 out of 5 by 3DRIVER from Easy Use I bought this product to restore hood hinge's for my 1954 Chevy car. I bought a extra pair of hinge's that had rust but were solid for restoration. Thought about a professional restoration but figured I could do a good enough job a lot cheaper than the over $200.00 most restorers were asking. Soaked the hinge's in a bucket of white vinegar to remove rust, cleaned in baking soda, primed with gray primer, scuffed with scotch bright pad, and painted with Eastwood Cad Paint. Perfect!!
Date published: 2015-06-29
Rated 4 out of 5 by ezze from silver cad working on a 52 harley flathead and wanted to give some of my hardware and brackets a uniformed finish.found the product worked well and looks fairly close to real cad.maybe not 100%correct but i knew that going in and could have spent hundreds more having true cad plate done.happy with the results...
Date published: 2015-10-15
Rated 4 out of 5 by scottpro11 from Good Substitute for Cad Overall a good product with great coverage. Two coats is usually plenty. Although nothing can really replicate cad plating, this is a great product for getting that cad look without finding someone to actually plate them. I'll definitely use again.
Date published: 2014-11-30
Rated 5 out of 5 by MyFemurHurts from Results were great Media blasted some fasteners on my air filter housing, and the silver cadmium spray looks great. Came out even, no runs, and looks pretty convincing. Much cheaper than sending those off to the local plater.
Date published: 2014-11-28
Rated 4 out of 5 by Mike 9032 from Silver cad I use this on dash pots etc that were originally silver cad. I glass bead the parts first and paint with silver cad. It gives the part a cad look and the paint is great quality and flows out well
Date published: 2016-05-04
Rated 1 out of 5 by art e from not even close Looks just like silver paint. I tried light coats, heavy coats, dry coats, and wet coats. They all look like silver paint.
Date published: 2016-02-14
Rated 4 out of 5 by donc from silver cad I really like this paint it has just the right shine, went on nice & uniform No sags or runs & covered real good.
Date published: 2014-12-16
You Might Also Like