Edelbrock Roller Lifter Pushrod 5/16" Diameter 7.714" Length Hardened Steel Set 289/302
Set of Edelbrock Hardened Steel Roller Lifter Pushrods with a 5/16" Diameter and a 7.714" Length for 289 and 302 Small Block Ford Engines.
Continue upgrading your 289 or 302 small block Ford engine's performance by purchasing this Set of Edelbrock Hardened Steel 7.714" Roller Lifter Pushrods from CJ Pony Parts! These Edelbrock pushrods are designed to be used with hydraulic roller lifters (EDL97453) and come as a set of sixteen for your 289 or 302 engine.
When increasing your engine's horsepower, you want to be sure to not forget about upgrading internal parts. The larger the increase of power, the more stress it puts on the motor and its components. So make sure you are getting quality performance parts that can handle all the horsepower under your hood.
Edelbrock Roller Lifter Pushrod Set 9659 Features & Benefits:
- Sold as a set of 16
- Manufactured from case hardened tubing
- 5/16" in diameter
- Overall length of 7.714"
- Surface hardening and welded ends
- Maximum durability
- Designed to be used with hydraulic roller lifters (EDL97453)
- Can be used on engines with or without hardened steel guideplates
Edelbrock manufactures these pushrods from case-hardened tubing with welded ends to provide maximum durability. Case-hardening is an act of hardening the outer layer of the metal while the inner layer of the metal stays soft. This allows the soft core to absorb more stress and not crack, but also provides durable wear resistance on the outer layer. The pushrods have a diameter of 5/16" and overall length of 7.714". Whether you have hardened steel guideplates on your engine or not, these push rods can be used on your small block 289 or 302.
Tech Tip: You should always measure for the length of the pushrod you will need according to your valve train setup, especially for custom valve trains.
*This set of pushrods will ONLY work with a 289 or 302 small block Ford engine.
If you're looking for more performance out of your engine, check out Edelbrock, who is one of the industry leaders with parts for Ford engines and has more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your motor with high quality performance products.
Order this Set of Edelbrock Hardened Steel Roller Lifter Pushrods with a 5/16" Diameter and a 7.714" Length for your 289 or 302 Small Block Ford Engine from CJ Pony Parts today!
California Residents: Proposition 65 Warning
This product will fit the following Bronco years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: