FiTech Go Spark CDI Ignition Box and Coil
Highlights
- Sparks Below 2,500 RPM
- Boosts Starting Power
- Coil Enhances CDI Performance
- Ensures Complete Combustion
FiTech Go Spark CDI Ignition Box and Coil.
Maximize your engine’s potential with the FiTech Go Spark CDI ignition box and coil (91100)! This box and coil combo produces a series of multiple sparks below 2,500 RPM, boosting your starting power and idle quality. Even at higher RPMs, it keeps delivering full energy sparks throughout the racing RPM. This ensures complete combustion of the fuel mixture, providing top-tier performance every step of the way. Plus, with the high-energy coil included, the CDI’s performance becomes that much better.
Features and Benefits:
- Produces Series of Sparks Below 2,500 RPM
- Boosts Starting Power, Idle Quality, & Throttle Response
- High Energy Coil Enhances CDI Performance
- Delivers Full Energy Sparks Through Racing RPM
- Ensures Complete Combustion of Fuel Mixture
- Accepts Trigger Signal from Variety of Distributors
- Usable with Separate 12-Volt Square Wave Tach Output
You can pair the ignition box and coil with almost any distributor. This is thanks to its ability to accept trigger signals from HEI, amplifier, points, and 2-wire non-magnetic distributors. You’re also welcome to use it with a separate 12-volt, square, wave tach output to trigger the EFI system and or tachometer.
Specifications:
- Spark Energy: 150mJ
- Primary Voltage: 450 Volts
- Spark Duration: 20 Degrees
- Max RPM: 10,000
- Multi-Spark to Battery Supply: 2,500 RPM at 6-18 Volts
Vehicle Fitment:
- 1965-1995 Ford Mustang
- 1966-1977 Ford Bronco
- 1948-1979 Ford F-100
- 1960-1987 Chevy C10
- 1988-1998 Chevy/GMC C/K
*Must have a 4, 6, or 8-cylinder engine with a distributor
California Residents: Proposition 65 Warning
Related Categories: Mustang Ignition Boxes, Restomod Engine, F-100 Ignition Boxes, F-100 Restomod Engine, C10 Ignition Boxes
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following C/K years:
- 1988,
- 1989,
- 1990,
- 1991,
- 1992,
- 1993,
- 1994,
- 1995,
- 1996,
- 1997,
- 1998,
This product will fit the following C10 years:
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
