Maximum Motorsports Sway Bar 1-1/4" Weld-On Adjustable Rear Kit Mustang With Solid Rear Axle 1979-2004

CJ's Part Number:
RSB46-V

Highlights

  • Proudly Made in the USA!
  • Suspension Upgrade
  • Provides Cleaner Appearance
  • Your Choice of Wall Thickness
From
$469.97

Maximum Motorsports Rear 1-1/4" Adjustable Weld-On Sway Bar Kit for all 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with a Solid Rear Axle.

If your 1979-2004 Mustang features a Solid Rear Axle, then upgrade your suspension today! Pick up a brand new Maximum Motorsports Rear 1-1/4" Adjustable Weld-On Sway Bar Kit from CJ Pony Parts today!

Features and Benefits:
- Fits 1979-2004 Mustangs with a Solid Rear Axle
- 1-1/4" Rear Sway Bar with your Choice of Wall Thickness (.095”, .125” and .250”)
- Fully Adjustable Rear Sway Bar
- Weld-On Rear Sway Bar Kit
- Proudly Manufactured in the USA!
- Black Zinc Plated Finish (Torsion Bar)
- Anodized Aluminum Finish (Sway Bar Arms)
- Endlinks Made from Spherical Rod Ends (Adjustable to Eliminate Sway Bar Preload)
- Includes Urethane Bushings for Torsion Bar
- Includes all Necessary Mounting Hardware

The Maximum Motorsports Adjustable Weld-On Rear Sway Bar is designed to be a suspension upgrade for 1979-2004 Mustangs with a Solid Rear Axle. This Rear Sway Bar has a diameter of 1-1/4" while the choice between sway bar wall thicknesses (.095”, .125” or .250”) is up to you! This weld-on unit will require a decent amount of welding, which will provide your Mustang with a cleaner appearance upon installation. By giving you the means to fine-tune your handling balance, this kit will allow you to extract all the possible handling performance possibilities by tuning your Mustang to fit your needs as a driver. Rates offered by these sway bars range from softer than stock sway bars up to six times (6x) stiffer than any solid-axle sway bar offered on a 1979-2004 Mustang. The Maximum Motorsports Adjustable Weld-On Rear Sway Bar is proudly manufactured in the USA!

Please Note: This Maximum Motorsports Adjustable Rear Sway Bar will NOT work on 1999-2004 Cobra Mustangs due to the IRS Rear Suspension.

Kit Includes:
- Swaybar Tube (1)
- Pair of Aluminum Swaybar Arm (2)
- Pair of Axle Mount (2)
- Driver Side Chassis Mount (1)
- Passenger Side Chassis Mount (1)
- Set of Urethane Mounts & Grease (1)
- Pair of Shaft Collar (2)
- Hex Key (1)
- Pair of Rod-End, Female 3/8” – 24 (2)
- Pair of Rod-End, Male 3/8” – 24 (2)
- Pair of Jam Nut 3/8” – 24 (2)
- Pair of Installation Plate (2)
- Pair of Length of Spiral Wrap (2)
- Pair of Zip-Tie (2)
- Set of U-Bolt 3/8” – 16 (4)
- Set of Hex Bolt 3/8” - 16 X 1 1/2” (4)
- Set of Hex Bolt 3/8” - 16 X 1” (6)
- Set of Washer 3/8” (12)
- Set of Washer 3/8” (16)
- Set of Nylock Nuts 3/8” -16 (12)
- Pair of Swaybar Pinch Bolts (2)
- Set of Pinch Bolt Washers (4)
- Pair of Pinch Bolt Nuts (2)

Vehicle Fitment:
- 1979-2004 Mustang with Solid Rear Axle

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.