Pertronix Ignition Box Digital HP Black

The new Pertronix 510 Black Digital HP Ignition Box packs a lot of juice into a small package. Generating over 187MJ of spark energy this ignition box is pushing 30% more power than the competition.

Specifications:
Operating Voltage: 9-22 Volts
Cranking Voltage: 8-22 Volts
Current Draw: 1.2A per 1000 RPM
Input Trigger: Points, Electronic Ignition, or Mag Pickup
Output Voltage: 530 Volts
Output Energy: 187+mJ Primary Spark
Tach Output Signal: 12 Volt square wave, 50% duty cycle
Multi-Spark Windows: Up to 20 crank degrees
Start Retard: Adjustable 0-18 degrees / 500-1400 RPM
Housing: 6061-T6 Aluminum
Finish: Hard Anodized Black
Weight: 0.7 lbs
Length: 4.18 Inches (5.15" with connector)
Width: 3.75 Inches
Height: 1.65 Inches
Mounting Bolt Pattern: 3.5" X 3.25"

To protect your engine against massive damage from over REV, this Digital HP Ignition Box utilizes a 3-step digital REV limiter that will control burnout and launch power. The RPM trigger output accurately controls shift lights, solenoids and other RPM devices. The adjustable start retard will make it easier to turn-over high compression or difficult to start engines. Run onboard diagnostics and tach calibration periodically with the easy to use rotary switch and LED feedback. This Pertronix 512 Silver Digital HP Ignition Box will feed multiple sparks all the way to the redline for better spark timing and true multiple spark function. The tachometer output lead will produce a pure digital tach signal with added filters for OE tachometer compatibility.

Required Tools:
- Phillips Screw Driver
- Wrenches and Sockets
- Wire Cutters/Strippers
- Power Drill with a #20 Drill Bit
- Crimper (PerTronix T3001 Recommended)