Eastwood 11 Ounce Aerosol Can of Diamond Clear Gloss for Bare Metal Surfaces.Your vehicle's brass, aluminum, steel, die-cast, even cast iron parts can look their absolute best when you spray-on this clear, tough, flexible, Diamond Clear coating.
Eastwood's Diamond Clear gloss is a self-leveling, solvent-based, acrylic co-polymer formula that resists chips, cracks, fading and yellowing, and resists fuels and temperatures up to 300 degreesF. Ideal in underhood applications (except exhaust manifolds). Does a beautiful job on polished wheels, aluminum valve covers, as well as items around the shop and home. May slightly dull reflectivity.
*Applies best at 70 degreesF or warmer with 50% or less humidity; thoroughly cures in 24 hours in those conditions.
*One aerosol can covers about 6 square feet.
*For best results, apply only one full-flowing coat.
Similar Mustang PartsMore Tools & Supplies
Product ReviewsWrite a review
Eastwood Diamond Clear Gloss for Bare Metal 11Oz. Aerosol Can is rated out of 5 by 7.
Rated 3 out of 5 by Lanycakes from Not like an automotive clear coat. I bought 2 cans for clear coating my steel bicycle frame. When the can says clear coat, I assumed it would be like an automotive clear coat, but acryllic instead (it was actually just a film). I bought even though it was just a bike for and frame, I used up both cans were supposed to cover at least 6'^2. I just kept on spraying looking for any wetness but couldn't find any. Time will tell if two spray cans at 1 foot distance coud distribute the coat.
Date published: 2015-06-10
Rated 4 out of 5 by Moshie from Worked well! Overall I was happy with the product-I tried it on motorcycle parts. I polished cleaned and sprayed . I was happy but not as clear as I thought it would be. I would use again. Thanks
Date published: 2015-11-08
Rated 3 out of 5 by Mark7356 from Looks good but didn't last Parts looked great after applying Diamond Clear but within a few days it started peeling off. It would probably work just fine on something that's never going to get touched
Date published: 2015-08-21
Rated 4 out of 5 by TV 2M8O from Nice finish I'm using this to protect bare polished or as stamped metal and applies to a nice finish.... let's hope it holds up in the long run!
Date published: 2015-06-04
Rated 4 out of 5 by Ron G from Nice Product Product worked to perfection. After cleaning the rims on my 1976 Gran Torino, I sprayed on the clear and they look real nice.
Date published: 2015-04-09
Rated 5 out of 5 by James Ropp from Diamond Clear I buff a trans till it shines then spray the clear and it stays clean and shines very nice.
Date published: 2015-04-11
Rated 4 out of 5 by John J from Covers well and dries fast. I wanted a product I could use to maintain the original unpainted look of bolts on an engine. They look great.
Date published: 2015-11-10
You Might Also Like
CJ's Low Price:$15.99