Edelbrock Roller Rocker Arm 3/8" Stud Set 289/ 302/ 351W

If you need new roller rocker arm studs for either street or competition use, you should definitely take a closer look at this Set of Edelbrock Roller Rocker Arm 3/8" Studs that’s now available at CJ Pony Parts!

Features and Benefits:
- Designed for use on 289, 302 and 351W Engines
- Set of 16 studs
- Accepts 3/8" stud mount roller rocker arm
- Ideal for Street and Competition use
- Chromoly construction with black oxide finish
- Thread Length: 1-3/4"
- Installs in cylinder head, securing roller rocker arm to cylinder head
- End 1: Coarse threads with 3/8" diameter (0.375") - installs in roller rocker arm
- End 2: Fine threads with 7/16" diameter (0.4375") - installs in cylinder head

This set of Edelbrock (8599) Roller Rocker Arm 3/8" Studs comes with 16 studs that can be used on a 289, 302 or 351W engine. They each have a thread length of 1.85", and the 7/16-14" thread gets installed in the cylinder head. The 3/8-24" thread is designed to secure the roller rocker arm to the cylinder head.

Installation Note: Torque down the rocker studs to 45 ft./lbs. Check alignment again to be sure that the guide plates did not move while torquing the studs.