Baer Brakes Rotor Ring Replacement 13" .810" Thick Slotted/Drilled With Zinc Passenger Side

Baer Brakes designed their 13 Inch Slot and a Drilled Rotor Replacement to be a direct fit performance upgrade for your vehicle’s brake system. Featuring a .810-Inch-Thick construction, the rotor boasts a Zinc exterior and is specifically tailored for Passengers' Side use. A full 13” circumference provides excellent grip and traction when the brakes are engaged, while the drilled and slotted design release brake gasses and increases cooling. When the gases are released through the slots, the pads can evenly press against the rotor for stronger braking power.

Features and Benefits:
- Increased Braking Power
- Drilled Slots Release Trapped Brake Gasses
- Slotted Cuts Expel Heat
- Even Brake Pad Surface Contact
- Designed Exclusively for Passenger Side Use

Slots reduce the weight of the rotor, while also increasing cooling along the surface of the rotor. To complete the package, a Zinc coating has been applied to the exterior to prevent rust from forming across the sides and rim of the rotor. With these traits in mind, this is the perfect replacement or addition to your vehicle’s brake system.

Rotor Specifications:
- Rotor Diameter: 13 inches
- Rotor Thickness: .810 inch
- Rotor Bolt Circle: 8.5 inch

Notes:
Rotor hardware can be used up to 3 times before replacing. If you need hardware pick from the list below. This rotor is used on rear SS4+ 13-inch systems.

Vehicle Fitment:
- Bronco 1966-1977
- F-100 1948-1979
- Mustang 1964.5-2004
- Chevrolet C10 1960-1987