Maximum Motorsports Rear Sway Bar Adjustable Bolt-On 7/8" X .188" Wall Kit Mustang 1979-2004

Maximum Motorsports:
MMRSB-5

Highlights

  • Made in the USA
  • .188" Thickness
  • Fine-Tuned Balancing
  • Fully Adjustable
$429.97

Maximum Motorsports Adjustable Bolt-On Rear Sway Bar Kit with a 7/8" X .188" Wall for 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs.

The best solution for body roll is the adjustability of a Maximum Motorsports Bolt-On Rear Sway Bar Kit MMRSB-5! This adjustable anti-roll bar features an American-manufactured 7/8" X .188" wall that aligns perfectly with your 1979-2004 Mustang's suspension system. The 7/8" sway bar is .188" thick and bolts on with minimal drilling required. All the necessary hardware is included to get your sway bar, torsion bar, spherical rod endlinks and urethane bushings working. Fine-tune your suspension to improve your driving performance by accommodating to your driving style. Adjustability ranges from softer than stock to 6x stiffer than solid-axle sway bars. Eliminate preloading, body roll and stiff handling response by upgrading to an adjustable solution!

Features and Benefits:
- Fits 1979-2004 Mustangs with a Solid Rear Axle
- 7/8" Rear Sway Bar with .188" Wall Thickness
- Fully Adjustable Rear Sway Bar
- Bolt-On Rear Sway Bar Kit
- Manufactured in the USA
- Black Zinc Plated Torsion Bar
- Anodized Aluminum Sway Bar Arm Finish
- Adjustable Spherical Rod Endlinks Eliminate Sway Bar Preload
- Includes Urethane Bushings for Torsion Bar
- Includes all Necessary Mounting Hardware

Included:
- Swaybar Tube (1)
- Pair of Aluminum Swaybar Arm (2)
- Pair of Axle Mount (2)
- Driver Side Chassis Mount (1)
- Passenger Side Chassis Mount (1)
- Set of Urethane Mounts & Grease (1)
- Pair of Shaft Collar (2)
- Hex Key (1)
- Pair of Rod-End, Female 3/8” – 24 (2)
- Pair of Rod-End, Male 3/8” – 24 (2)
- Pair of Jam Nut 3/8” – 24 (2)
- Pair of Installation Plate (2)
- Set of Frame Insert Tube (4)
- Pair of Length of Spiral Wrap (2)
- Pair of Zip-Tie (2)
- Set of U-Bolt 3/8” – 16 (4)
- Set of Hex Bolt 3/8” - 16 X 1 1/2” (4)
- Set of Hex Bolt 3/8” - 16 X 1” (6)
- Set of Hex Bolt 5/16” - 18 X 3 1/4” (4)
- Set of Washer 3/8” (12)
- Set of Washer 3/8” (16)
- Set of Washer 5/16” (8)
- Set of Nylock Nuts 3/8” -16 (12)
- Set of Nylock Nuts 5/16” -18 (4)
- Pair of Swaybar Pinch Bolts (2)
- Set of Pinch Bolt Washers (4)
- Pair of Pinch Bolt Nuts (2)

Additional Notes:
- This Maximum Motorsports Adjustable Rear Sway Bar will NOT work on 1999-2004 Cobra Mustangs due to the IRS Rear Suspension.
- The Rear Sway Bar Kit is a bolt-on unit that requires additional drilling for proper installation.

ATTENTION: Due to increased demand for this hand-built product, this part may take up to eight weeks for shipment.

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.