Painless Performance Integrated EFI And Chassis Harness For Mechanical Throttle Body LS1/LS6 GM 1997-2004
Painless Performance Integrated EFI and Chassis Harness for 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 LS1 and LS6 GM Engines with a Mechanical Throttle Body.
Looking for a premium replacement chassis harness? Install this long-lasting option from Painless Performance. EFI/Chassis harnesses 60608 are the perfect solution for anyone doing a complete rewire of a vehicle as well as transplanting a GM Gen III fuel injected engine. This kit is designed for use on 1997-2004 LS1 engines with a 4L60E transmission. The chassis wiring and fuel injection wiring are completely integrated into a single 26 circuit/7 relay fuse block, eliminating the need to have separate fuses and relays for the fuel injection. These harnesses 60608 do not support flex fuel engines and require the use of a mechanical throttle body. Included in this kit you will also find all the required terminals & connectors for a super streamlined installation.
60608 Features:
- 1997-2004 GM LS1 and LS6 engines with integrated EFI & mechanical throttle bodies
- 26 fuses with 7 relays, mini and maxi fuses
- Color coding based off of 2000 Camaro
- Circuit designations printed on wire tags on all connectors and printed on wire for open ended wires
- Excellent for swapping in a LS1 or LS6 engine with mechanical throttle body
This harness has the following chassis connections:
- A/C & Heat
- Accessory / Cigarette Lighter
- Backup Lights
- Brake Lights
- Charging
- Cruise Control
- Courtest & Dome Light
- Electric Fuel Pump
- Emergency Flashers
- Cooling Fan Relay #1
- Cooling Fan Relay #2
- Fused Power Source
- Headlights
- Horn Relay
- Ignition Coil
- Instrument Panel Lighting and Gauges
- Park Lights
- Power Antenna
- Power Door Locks
- Power Windows
- Radio/Clock (Constant and Switched)
- Starting
- Tail Lights
- Third Brake Light
- Turn Signals
- Wipers
The fuel injection harness includes connections for the following components:
- A/C Compressor
- Alternator
- Cam Position Sensor
- Coolant Temperature Gauge
- Crank Position Sensor
- Data Link Connector
- Driver/Pass Front O2 Sensors
- Engine Coolant Temperature
- Fuel Pump Relay
- Grounds
- Idle Air Control
- Ignition Coils
- Ignition Switch Signal
- Injectors
- Intake Air Temperature Sensor
- Knock Sensors
- Malfunction Indicator Lamp
- MAP Sensor
- Mass Airflow Sensor
- Oil Pressure Gauge
- ECM
- PRNDL Switch
- Starter
- Tachometer
- Throttle Position Sensor
- Transmission
- Vehicle Speed Sensor
- VSS Output for Speedometer
Applications:
- 1960-1987 C10
- 1948-1979 F100
Proposition 65 Warning
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Ford Bronco Parts, Ford F-100 Parts, Bronco Engine
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following C10 years:
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
