Eastwood Rust Encapsulator 15Oz. Aerosol

Eastwood: 16060Z
CJ's Low Price:
$23.99
1480723200 28100
Earn 23 RPM Points What's this?
Eastwood Rust Encapsulator 15Oz. Aerosol
Eastwood Rust Encapsulator 15Oz. Aerosol Eastwood Rust Encapsulator 15Oz. Aerosol
Eastwood

Product Description

Eastwood Rust Encapsulator in 15oz. Aerosol.

Aerosol Rust Encapsulator By Eastwood

Product Reviews

Write a review
Eastwood Rust Encapsulator 15Oz. Aerosol is rated 4.7 out of 5 by 89.
Rated 5 out of 5 by from Rust Encapsulator & Silver Agent I have applied a lot of the black matte encapsulator finish on an old truck frame without much if any surface prep & some white rust encapsulator on old shocks. I would say the paint is great & the applicator (me) needs replacement. Even at that I think it stopped the rust and now six months later I see no bleed through & I have been watching it on the white shocks. These shocks were ugly rusty and pitted & now they are bright white and look great at 10'. Sure makes for an easy improvement on rusted truck frames. I used Eastwood's wheel paint with more prep and it looks great. We'll see in time and with winter salt coming. Sorry pics bit blurry
Date published: 2015-12-02
Rated 4 out of 5 by from Does what it says Used this on the bottom of my 1962 Cadillac Coupe Deville. Was leary of some of the reviews. Basically don't spray it on bare metal, don't use it in the cold, and be prepared for some of the cans to clog. Other than that, we pressure washed the bottom of the car and got everything clean. Then we sprayed with two coats of Rust Encapsulator and then two coats of Chassis Black from Eastwood. Some reviews said that if you didn't top coat it then the rust would come through in about a year so that's why we went with the Chassis Black top coat. Looks great. Went on great. A couple cans clogged up but I was expecting that. Sometimes just switching the nozzle with another fixed it.
Date published: 2016-04-16
Rated 5 out of 5 by from This product is awesome I bought this to touch up my engine compartment on my 72 Mustang convertible. I brushed off the rusty areas with a wire brush, scuffed up everything, wiped it all down with acetone and applied. I used two or three wet coates to get great coverage and I'm sure there won't be any rust coming back any time soon. Eastwood products really perform to their claims. I was planning on spraying a semi-gloss black over this to match the stock gloss levels, because the matt really isn't concours for a Ford, but it looks so good that I decided to paint the rest of the engine compartment with this product. It looks that good!
Date published: 2015-04-21
Rated 4 out of 5 by from Great product I've used a ton of this on the last 3 chassis resto's I've done. Works great! Covers well. Very durable when used with the chassis paint as top coat.
Date published: 2015-04-07
Rated 4 out of 5 by from Good coverage Used this on the brake drums on a 72 Skylark. Minimal prep time with a wire brush and some solvent, got good coverage with two coats. Dressing up the brake drums because we replaced the stock steel wheels with some modern aluminum rally-style wheels, and the rusty brake drums didn't look too good behind the new wheels. Now the drums have a clean flat black appearance behind the wheels and kind of "disappear." This car stays in the garage, and doesn't go out when it's raining, so I don't know how this paint would hold up under tougher conditions. We shall see if it holds up in this application or if the rust comes back.
Date published: 2016-02-29
Rated 1 out of 5 by from Not great, just like black spray paint Wire wheeled all of the parts to be painted, used 240 grit on them, cleaned with brake cleaner, then prepped with pro grade grease and wax remover. Shook can for nearly 5 min with the mixing ball loose. Sprayed on 2 generous coats, and even after setting for 2 days in above 70 degree temps...I can pretty much scratch this off with my fingernail. How it this supposed to be used as a top coat as advertised? This is nothing but super over priced black spray paint...too bad...I really though this stuff would be good.
Date published: 2015-11-06
Rated 5 out of 5 by from A Good Product to Protect Meal from Rust I initially used Rust Encapsulator to prepare the metal on my 55 Chev truck restoration where there were many rusty surfaces and it worked very, very good. And now I feel that I have adequate protection for my valuable truck. Now, I use Rust Encapsulator on so many of my projects for vehicles, tractors and tools around home. Thanks Eastwood!
Date published: 2014-10-24
Rated 5 out of 5 by from Best Gloss Finish from Spray can I do lot's of small to major restorations and need a spray can gloss black that is easy to work with, lays down and flashes out nicely with good chip resistance. For me so far this is the best product yet. Of course you can't beat a finish from a HVLP gun and commercial quality paint but many times I have small pieces where this is just not practical. I've used other gloss black spray can products from here but was always disappointed with poor flash out, runs too easily or is too sensitive to humidity / temp. If you need to do small pieces or areas where the finish needs to be almost paint gun quality, try this. I think the finish looks better then even the 2-stage can paint. I recommend it!
Date published: 2015-01-12
  • y_2016, m_12, d_2, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_89
  • loc_en_US, sid_PTRE, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 101.29ms
  • REVIEWS, PRODUCT

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 96.83ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like