Eastwood Extreme Chassis Paint Black in 14oz Aesosol.You spent many hours prepping your frame; now paint it with the best Chassis Black formulation available. Up to 3X more durable than Original Chassis Black. This maximum durability formulation offers improved brake fluid, fuel, solvent, chip and scratch resistance.
*For improved adhesion prime clean bare metal with Extreme Chassis Black Primer. Allow 15-20 minutes between coats of Extreme Chassis Black. Can be recoated at any time without lifting. Prime rusty metal with Eastwood Rust Encapsulator.
Similar Mustang PartsMore Paints & Dyes
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Eastwood Extreme Chassis Paint Gloss Black 14Oz. Aerosol is rated out of 5 by 14569.
Rated 5 out of 5 by Indy from Read the instructions! I bought this to do the engine bay and transmission crewmember on my '68 mustang. I haven't sprayed the bay yet but have done several parts such as the crewmember and steering box. It looks very similar to powberciating and is a solid coat. I covered the parts about 4 times with a few minute between coats. Jus enough to prevent runs. Do you metal prep correctly and take your time spraying and this works very well. Even the rough casting on the steering box went on well.
Date published: 2015-10-01
Rated 5 out of 5 by Humpinhenry from Chassis Restoration - 41'Studebaker Champion After using different chassis paints over the years together with a wide variety of rust primers, I decided to utilize Extreme Chassis Black as my top coat and was not disappointed with the results. Prep my frame from bare metal to application of a brand name metal rust primer. Then sprayed Extreme Chassis Black with outstanding results. Great product coverage, two coats is a must to ensure proper coverage. I will use this product again, Thanks !!!
Date published: 2014-10-26
Rated 5 out of 5 by BustinJegley from This stuff is great to work with! With proper prep adhesion is great. The aerosol cans have a really good pattern, and the cans emptied all the way. This job took 2 1/2 cans of both primer and paint. Its very tough as well. I dropped a skid plate on accident and it didnt scratch or chip. Everything was taken to bare metal, and solvent cleaned alot.
Date published: 2016-10-20
Rated 5 out of 5 by TerryD from Chassis Black Paint I have bought and used this product and absolutely love it. In a wet condition the accidental overspray just blends and is forgiving. I truly love to use this paint and will continue to use it for my restore projects.
Date published: 2014-11-03
Rated 5 out of 5 by Randyk from Works very well. I am restoring a 71 M G B. The finish looks great, sticks very well, and has resisted some abuse, not flaking off. What more could you want.
Date published: 2016-07-20
Rated 5 out of 5 by Raul Bardales from professional finish Great product, i used it in the engine accessories such as brackets, pulley and other parts of suspension, leaves a nice glossy deep black .
Date published: 2016-08-24
Rated 5 out of 5 by Lemansblue from Awesome paint I tried this after using another brand with poor results. It sprayed really well with no problems flowed great and nice shine.
Date published: 2015-06-06
Rated 5 out of 5 by pikefly from excellent product the chassis black sprays great and lays done a nice even coat the best nozzle I've used in a spray can
Date published: 2014-11-13