Eastwood Electric Metal Shears.If you've ever tried to saw through heavy-gauge steel, you know how difficult it can be to produce a clean cut. This tool will save a lot of sweat, and slice cleanly through up to 18-gauge steel.
Features replaceable, high-speed-steel cutting blades and 360 degree rotating jaws that let you easily cut straight, round or irregular shapes. Blade removes a curl of metal about 3/16" wide, without deforming your workpiece. Equipped with a heavy-duty, drill-type, 120v motor with variable 0-2500-rpm speed.
Similar Mustang PartsMore Sheet Metal Tools
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Eastwood Metal Shears Electric is rated out of 5 by 17.
Rated 1 out of 5 by Montague from Metal Electric Shears Item 13475 I received the cutting shears about a week ago. The shears cut about 3" on a sheet of .050 aluminum and stopped cutting. The shears were running but the shears would not cut anymore. I was able to hold on to the bottom of the cutting blade while the shears were running. It appears that something broke inside as the bottom cutting blade was not moving up and down. Sending the item back to Eastwood. By the way its made in China.
Date published: 2014-12-22
Rated 1 out of 5 by Todd A from Performs OK Used on 18 gague plate and was able to cut only about 12 inches before it stopped cutting. Tried to cut another piece and got about an inch. So I changed cutting blades and the same thing about 18 inches and it stopped cutting. Very disappointed.
Date published: 2015-09-25
Rated 5 out of 5 by MARAUDER46 from Works good i bought this as i build large ice fishing huts in my spare time and i've either sheered my full sheets on a large setup, or cut all smaller pieces by hand.. not always easy to cut many feet worth per job, but this seems to be working just fine for me,, i have ordered one extra packet of replacement blades as i hear they may be a bit brittle,, and i'm thinking i may order a few more sets to have on hand,, but otherwise, it cuts very nice, very easy to use, very predictable smooth cuts and lines, clean, quiet, i did put some masking tape where the cutter would slide on the material as i like using polished metals and i don't want it scratched up,, i give this cutter,, and the replacement blades a two thumbs up and i rate it a 5! i also give the eastwood company a 5 for being very helpful over the phone and with the knowledge of the tool when i called to ask about it, nice experience all around!!!
Date published: 2014-12-19
Rated 5 out of 5 by Spring valley Paul from Eastwood electric metal shears Hay, I have been doing things the hard way for years. I have been using a saws all and tin snips for years, now life is easy. These metal shears work great and with thin sheet metal you can control your cut and make curves and round corners. The edges are not sharp so no cut fingers, thanks.
Date published: 2015-09-18
Rated 4 out of 5 by 72 vert from Works good but returned first unit The cutter works good, I would like it better if it wasted less material. The first unit was returned to the store. It did not cut well and when compared to the one at the store, we found the stroke on the cutter was less than it should be.
Date published: 2016-01-04
Rated 5 out of 5 by Sojourner from Electric shears So far so good. It cut 22 guage with no problems so it may be under rated for up to 18 guage.
Date published: 2015-11-13
Rated 5 out of 5 by Sinister customs from good tool Works good should come with extra sheer blades works fine though
Date published: 2015-07-06
Rated 5 out of 5 by jeep89 from works great wish I bought it sooner, works great, cuts clean and fast.
Date published: 2015-04-23
Will the eastwood shears cut 28ga sheet metal
The shears will cut up to 18 gauge metal.
Date published: 2015-11-25
This product can cut the stainless steel and how thick does it can cut? also how long the warranty is it have? Thank you!
It can cut up to 18-Gauge Steel. Please contact he manufacturer regarding any warranty information.
Date published: 2015-11-20
What is maximum metal thickness that can be cut?
The maximum metal thickness is 18 gauge.
Date published: 2015-11-18
How much are replacement blades
We do not offer replacement blades.
Date published: 2015-10-09
whuts your phone number
Date published: 2015-07-07
will this shear cut corrugated steel building material ( such as roofing and side walls)
It depends on whether steel building material is within the specs of the tool.
Date published: 2015-02-03
You Might Also Like