Eastwood PRE Painting Prep 11 Ounce Aerosol Can

Eastwood: 10041Z
CJ's Low Price:
1480982400 12823
Earn 13 RPM Points What's this?
Eastwood PRE Painting Prep 11 Ounce Aerosol Can
Eastwood PRE Painting Prep 11 Ounce Aerosol Can Eastwood PRE Painting Prep 11 Ounce Aerosol Can

Product Description

Eastwood 11 Ounce Aerosol Can of PRE Painting Prep.

Before you begin painting or powder coating, make sure the final step of surface prep involves Eastwood's PRE Painting Prep. This unique blend of solvents is specially formulated to remove dirt, wax, polish, grease, silicone, buffing compound, even road tar, ensuring a clean surface that's ready for a professional quality finish.

Eastwood's PRE Painting Prep is super easy to use. Just spray it on and wipe it off. It works much better than the average lacquer thinner, which can leave a thin residue on the surface that could interfere with proper paint adhesion.

- Removes silicon, wax, polish, grease, dirt and much more
- Helps to promote paint adhesion
- Easy spray-on, wipe-off application

*One aerosol can treats up to 10 square feet.

Please Note: PRE Painting Prep is a blend of solvents that may damage plastic, so please test first.

Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

Product Reviews

Write a review
Eastwood PRE Painting Prep 11 Ounce Aerosol Can is rated 4.8 out of 5 by 37.
Rated 5 out of 5 by from Amazing I purchased this along with the Chevy Blue paint to repaint my 468 BB, to say the least I was impressed. Customer service helped me track my shipment from start to finish as I wanted to material to arrive in only 5 days which it did and delivered on a Saturday just in time to begin prep and paint. The PRE cleaner is amazing I used a wire wheel to remove the old paint and then applied the PRE treatment and the block looked brand new! I applied 5 coats to the block and the finish is absolutely great. If you are painting your engine block Eastwood is the way to go. Side note I also have used the PRE as a degreaser its far and away better than the stuff you can get off the shelves
Date published: 2015-02-13
Rated 5 out of 5 by from Great Cleaner, Surface Prep and Seam Sealer Smooth I purchased seam sealer and this product to seal seams on my 66 Cobra I am building. The video on the seam sealer suggested using the pre Painting Prep to smooth out the sealer and it worked exactly as advertised. After brushing on the seam sealer; spray a little of this stuff on an smooth it out with a brush or your finger ... looks very professional
Date published: 2015-02-06
Rated 4 out of 5 by from Quality Product. I've been using this product for many years and really like it. It isn't as "hot" as lacquer thinner but safer and easier to use with the spray nozzle. I keep several cans on hand at all times.
Date published: 2015-04-01
Rated 4 out of 5 by from A bit pricy, but really does do the job well I've purchased this product to use prior to the application of Eastwood's, "Plastic Resurfacer" as well as Eastwood, "Rust Encapsulator", and their, "Rubberized Rust Encapsulator". The adhesion of those products was excellent when prepping with "Pre Painting Prep". A noticeable difference over the product I used 1st. So yes, it's perhaps a tad expensive, but it's exceptionally effective. You can use it as sparingly as possible and get the result you are needing.
Date published: 2015-10-06
Rated 5 out of 5 by from Its works! This stuff works GREAT!! I've all ready ordered more!
Date published: 2016-04-24
Rated 3 out of 5 by from Pretty good stuff. I bought this for cleaning the large plastic areas on my Chevy Avalanche before using Eastwood Plastic Resurfacer. It appeared to work as advertised. I don't recommend using this for large areas as it sprays a small direct stream. When applying it directly on the surface it wouldn't spread evenly over the surface. I sprayed it on a soft cloth and then spread that across the area.
Date published: 2014-11-15
Rated 5 out of 5 by from Just WOW! Bought this for cleaning an aluminum tri power intake manifold for my 67 Vette big block. The intake had a lot of years of baked on grime. Sprayed this on, and back to bare metal with once application. Amazing stuff, and leaves no residue behind. Do yourself a favor, get this and the Aluminum prep cleaner, and you won't believe the difference. Great stuff hands down.
Date published: 2016-07-04
Rated 5 out of 5 by from Great Product I wish I would have found this stuff years ago. I do a lot of aluminum polishing on vintage motorcycles and the compounds were always difficult to remove. this product is easy to use and really cleans off that waxy compound with ease. I've also used this prior to rattle can painting and powder coating. I always have at least 2 cans of this on hand
Date published: 2016-08-14
  • y_2016, m_12, d_2, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_US, sid_EW10041Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 102.02ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 227.71ms
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like