Eastwood 1 Gallon Jug of Rust Converter.This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Plus, the protective coating will seal the surface against moisture to prevent future rust growth.
Applies easily, simply remove loose rust with a wire brush, then brush-on or spray-on Eastwood's Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood's Chassis Black. 200-300-sq.-ft. coverage per gallon jug. Does not require mixing.
Always use appropriate eye, skin and respiratory protection when using this product. Safety information is also described on the jug label. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.
*For use on steel and iron only; do NOT apply to paint.
Similar Mustang PartsMore Rust Removers & Inhibitors
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Eastwood Rust Converter 1 Gallon Jug is rated out of 5 by 5638.
Rated 5 out of 5 by MrTWG from So far so good. First off, my order arrived lightning quick. Eastwood cut a perfect light on this shipment. When I order something I want it now and Eastwood never disappoints. As far as the rust converter, I've used it so far on a John Deere mower deck that I've rebuilt and on a 2001 Ford F-150 that I'm trying to extend its service life. After wire brushing away the loose rust I painted on two coats of rust converter as directed, followed by Eastwood's rust encapsulator. Both the converter and the encapsulator go on easy but the encapsulator stars to dry and gets tacky fast so keep that in mind. Also I wore a good quality respirator mask. The fumes are hard on the lungs. The job when done looked great. Hopefully I've added years of rust free service to my equipment.
Date published: 2015-10-28
Rated 5 out of 5 by Davegbu from Worked great I used this on an old steel trailer bed. It had gotten pretty rusty hauling horse poo for the garden and 60 years of use. I followed the directions getting all the loose rust off and applied the product. All the rust turned black as it said it would. Made a good surface for bed liner to go over top.
Date published: 2015-12-23
Rated 5 out of 5 by Denny B from Use as intended....... Follow the directions on container. Do not use over color coats or other top coat finishes. Converter will cure if applied over primer or media blasted metal. I have used numerous rust converters during the last 30 years, and this is by far the best product on the market ... when used properly.
Date published: 2016-09-23
Rated 4 out of 5 by Picky from Easy to use! Finish is great!! This is the first time to use the Eastwood products. The rust converter seems to work great. Turned the metal to a black color. I followed up with the another coat. Worked and looked great!
Date published: 2014-12-31
Rated 5 out of 5 by TNJones from Awesome product! I used this on my 1954 Plymouth restoration project. This rust converter smells good and is not offensive to my eyes. It does a great job converting rust.
Date published: 2015-04-16
Rated 4 out of 5 by khalid 52 from Good product I received the order last week & used it at once, it is very good, for best results wait for 48 hours.
Date published: 2014-11-30
Rated 5 out of 5 by possum from Great products I have used about 4 gal. and 3 qts of rust converter and very happy with it.
Date published: 2014-11-11
Rated 5 out of 5 by Professor from great product I bought this to use on a truck frame. It works as advertised
Date published: 2015-06-09
You Might Also Like
CJ's Low Price:$16.99
CJ's Low Price:$24.99