Eastwood Rust Converter 13Oz. Aerosol

Eastwood: 51483Z
CJ's Low Price:
1481155200 12903
Earn 22 RPM Points What's this?
Eastwood Rust Converter 13Oz. Aerosol

Product Description

Eastwood Rust Converter in 13oz. Aerosol.

Quickly transforms surface rust into an inert paint-able surface. Aerosol is great for those hard to reach areas like floor pans and engine compartments, while paint consistency is thin enough to flow into cracks and seams.

Product Reviews

Write a review
Eastwood Rust Converter 13Oz. Aerosol is rated 4.5 out of 5 by 5602.
Rated 2 out of 5 by from Does not "Convert" Rust It actually just covers the rust in a hard, clear coating that can be painted over. Unless my product has gone bad. I can still see the rust underneath the coating. I see pictures and videos of brown rust changing its chemical composition and turning black - just can't confirm that with my use cases. It does seem to form a protective cover though, and may very well prevent moisture from reaching the metal, which would be beneficial. I just can't confirm that yet. I have also not had any issue with the product remaining sticky when applied to painted surfaces or bare metal - seems to harden without an issue.
Date published: 2015-11-22
Rated 1 out of 5 by from Horrible product Does not turn Black and do not - I repeat - do not spray on bare metal at all. Now I have to Sand blast again or scrub with acetone and scotch-brite pads. lost 4 days of time due to this product - poor instructions.
Date published: 2015-02-27
Rated 1 out of 5 by from not worth the money I even sand blasted the steel plates above my garage doors and put two coats like it said to do and then waited 48 hrs between coats and sprayed the converter on and the next day I painted the steel plates and rust started coming through the latex paint in less than a week, I was really disappointed with the product.I don't believe the latex paint caused the rust but who knows?
Date published: 2015-04-24
Rated 5 out of 5 by from Works great if you brush it on Buy the quart bottle, clean the surface of loose rust, prep with Acetone and brush it on with a foam sponge brush - works excellent. Dont buy the aerosol - very poor results with the aerosol on the same parts.
Date published: 2014-09-26
Rated 5 out of 5 by from worked great and no problem with curing worked great, had no problems with curing set up rock hard even on clean metal but i did scratched it up (rust converter) before applying epoxy.
Date published: 2014-11-08
Rated 5 out of 5 by from mark this is awsome stuff :) i just used this on my 04 dodge 3500 frame it rocks also used as a blueing for my gun barrels that have ware marks works like a charm
Date published: 2016-08-13
  • y_2016, m_11, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5602
  • loc_en_US, sid_EW51483, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 177.13ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 176.06ms
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like