Eastwood 10.6 Ounce Cartridge of Black Seam Sealer.After stripping a car or repairing a panel, replace the seam sealer to protect your hard work from the elements.
Eastwood's high-solids Seam Sealer seals cracks, crevices and body seams, as well as waterproofs and insulates. It adheres to paint, tack-dries in 15 minutes, air dries in 1 hour and remains flexible. Works great on firewalls, floor pans, trunk seams, fender extensions and taillight openings. Seam sealer is black in color, but can be painted after 1 hour.
*Use a standard caulking gun to apply.
Similar Mustang PartsMore Adhesives & Misc. Chemicals
Product ReviewsWrite a review
Eastwood Seam Sealer Black 10.6Oz. Cartridge is rated out of 5 by 11.
Rated 5 out of 5 by 67DeVille from Seam Sealer for that OEM look. I have used several tubes of this sealer so far, matching the OEM sealer applications. I ground out the original hard and dry sealers all over our project 67 Caddy. Pumped in beads (no more then 12" at a time) and fingered them down to match the original where applicable. Removed the original material between the inner and hood stiffeners and the skin and pumped it in the center holes just like the factory and it went in and came out the surrounding four holes just like the OEM process. The hood is now firm and quite, no tinny sounds when you tap on it and no swelling or bulges. Works perfectly, looks correct, sticks well and has the right firmness vs flex. Excellent product.
Date published: 2015-01-07
Rated 2 out of 5 by hassyfoto from Disappointed in Seam Sealer Unlike 3M seam sealer, this product went on very stringy and did not flow into/onto the seams. Used a small brush to help level the material and had hoped the seam sealer would level out smoothly and it did not. Will not use this product again. Although the 3M seld-leveling seam sealer is more expensive it would be well worth the extra money to invest a better product for better results.
Date published: 2015-01-26
Rated 5 out of 5 by Project Man from Eastwood Seam Sealer I have used this product from Eastwood several times and it is a high quality product. It is exactly like the material used in the assembly of vehicles in the United States. I not only use it during vehicle restorations but also for other projects where a professional bond is needed, especially where moisture is a concern.
Date published: 2015-11-22
Rated 4 out of 5 by BeetleBuilderBill from Good Stuff.... I have used Eastwood's Seam Sealer many times. Recently I ran out and bought another brand at a local auto supply store....big mistake! Eastwood's seam sealer is still messy to apply, but it is a much better product as it never cracks and takes paint better. It is long lasting.
Date published: 2016-05-05
Rated 5 out of 5 by Sprint69 from Excellent product I bought this to fill in some gaps and seams. As it mentions it can be painted over which was a consideration in buying this. Let it dry and scuffed off the extra and primer adhered great.
Date published: 2015-07-24
Rated 2 out of 5 by skoolbiz2 from Good for small gaps under 1/16 inch Does not work very well for gaps larger than 1/16 inch. On large gaps the sealer stays mushy. On gaps smaller than 1/16 inch, works pretty well.
Date published: 2015-02-09
Rated 5 out of 5 by Rboz57 from Works as advertised! I used this product for the seams on my C3 Corvette floorboards and it worked as advertised. Highly recommend for any automotive projects!
Date published: 2015-01-14
Rated 5 out of 5 by rs1516 from i used this sealer always works great! any time i need a good product i use eastwood there stuff always works good
Date published: 2015-11-05
You Might Also Like
CJ's Low Price:$24.99
CJ's Low Price:$16.99