Eastwood Zinc Phosphate 12Oz. Aerosol Can

Eastwood: 10281 Z
CJ's Low Price:
1481068800 28150
Earn 17 RPM Points What's this?
Eastwood Zinc Phosphate 12Oz. Aerosol Can

Product Description

Eastwood 12 Ounce Aerosol Can of Zinc Phosphate.

Replicate charcoal gray OEM plating with Eastwood's Zinc Phosphate. This high-solid enamel duplicates the charcoal gray zinc phosphate plating on inner and outer tie rod ends, tie rod adjustment sleeves, center links, some spindles, hood hinges and latches, sway bars and some shift and carb linkages. Withstands up to 300 degreesF and resists fading, chipping, fuel and UV. Contains 4 to 8% gloss.

*12 ounce aerosol can covers up to 6 square feet.

Similar Mustang Parts

similar Mustang parts More Paints & Dyes  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Eastwood Zinc Phosphate 12Oz. Aerosol Can is rated 4.5 out of 5 by 14806.
Rated 4 out of 5 by from Zinc Phosphate Aerosol Paint As a rebuilder of hood hinges with over 25 years experience, I find the zinc phosphate paint is darker grey that actual zinc phosphate coating, but slightly lighter in color than manganese phosphate coating. Many GM factory hood hinges (1966 into the 1970's) were manganese phosphate coated as is evident by the sparkle when exposed to sunlight. The Eastwood paint appears to contain a slight amount of metallic particles. It would be better if there was slightly more metallic to better simulate manganese phosphate. Overall, I would rate it as a good substitute for either zinc or manganese phosphate coatings and much cheaper.
Date published: 2015-02-14
Rated 5 out of 5 by from Zinc Phosphate Looks Like OEM Finish I use this for Pontiac Tripower Carb bases. They are cast iron and rust easily. The factory treated the carb bases with black oxide, but that coating is not durable beyond a year or so. This coating is very dark gray and gives the desired appearance and protection.
Date published: 2014-12-31
Rated 1 out of 5 by from Dissapointed! I was expecting a true zinc phosphating spray. Instead it is a black paint to look like zinc phosphating. I washed it off with lacquer thinnner. Not really a zinc phosphate agent to protect. I wanted to powder paint over the phosphated metal, but spray lacquer is not good for that.
Date published: 2014-10-28
Rated 5 out of 5 by from WOW I'm so happy on how my products work much less work than I imagined.
Date published: 2015-01-23
Rated 5 out of 5 by from My Flowmaster Mufflers Look Brand New! Since my mufflers are almost exactly behind the rear tires on my 2010 Mustang GT, road debris being kicked up had worn away the previous finish and the welds were starting to rust. After using a wire brush and steel wool, I was able to clean up and smooth out the rough spots and my Eastwood Zinc Phosphate worked perfect the first time to bring them back to their original look. I highly recommend this product for anyone repainting their Flowmaster Mufflers!
Date published: 2015-08-10
Rated 3 out of 5 by from Good Color Despite the high cost I gave this a shot for my hood latch and hinges as I could not find a really flat black. The color of this paint is a dark gray, not black. Looks like phosphate I suppose. But for the price of the paint you would think they could use a modern spray tip like used on Duplicolor and Krylon paints. Instead it has the old fashion lousy tip. No excuses there.
Date published: 2016-09-09
Rated 4 out of 5 by from Nice Finish Was somewhat skeptical when i realized this paint is meant to simulate a finish used by GM on misc parts rather than actually duplicate it. But have to say the spindles I painted with this product look good. I cant comment on durability at this time
Date published: 2015-07-13
  • y_2016, m_11, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14806
  • loc_en_US, sid_PTZP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 134.9ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 127.32ms
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like