Painless Performance Wire Sleeving Classic Braid 20' x 1/8"

Painless Performance:
70956
Painless Performance Wire Sleeving Classic Braid 20' x 1/8" is rated 4.0 out of 5 by 1.
  • y_2019, m_11, d_18, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_WHC21, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 179.92ms
  • REVIEWS, PRODUCT

Highlights

  • Tightly Woven Material
  • OE Style Wire Loom
  • Melting Point Of 482 Degrees
  • Split Overlap Design
$33.99

Painless Performance 20' x 1/8" Classic Braid Wire Sleeving.

Cover those unsightly wires with Painless Performance wire sleeving. Classic Braid gives your car an old school look with flat black, cloth-like material. Basically, it has the appearance of braided hose.

The material has a lateral split along its 20 ft length that easily closes in around the wire bundle without the need for additional tape or wire ties. More than 25% edge overlap allows coverage around inline plugs, connectors and splices. Although lightweight and flexible, Classic Braid retains its shape and rigidity from -94 degrees Fahrenheit to over +250 degrees Fahrenheit and has a melting temperature in excess of +400 degrees Fahrenheit. High-tech materials are used that resist abrasions and cuts.

Painless Performance Classic Braid Features and Benefits:
- Dimensions: 20 ft length x 1/8 in diameter
- Continuous temperature rating -94F to +257F
- Melting point +482F
- Resistant to automotive chemicals and fluids
- Great for Auto, Marine, RV, Aircraft, Power Sports and More

It is important to route your wiring away from high heat, moving parts and anything that could cause abrasion. Painless Performance 20' x 1/8" Classic Braid Wire Sleeving consists of durable material that is light weight and extremely flexible. Classic Braid is ideal for improving the aesthetics of your Mustang and also protecting against abrasion and heat. The wire sleeving features a tightly woven construction that is very good at blocking out mud and dirt while allowing adequate drainage.

Give your Mustang that classic show car look with Classic Braid. This wire sleeving comes in a 20 feet length with a 1/8 inch diameter. Transform the look of your engine bay and give your aftermarket wiring a factory installed appearance.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,
  • 1980,
  • 1981,
  • 1982,
  • 1983,
  • 1984,
  • 1985,
  • 1986,
  • 1987,

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Rated 4 out of 5 by from What a pain to install Installed the 1/8" sleeves over the single wires for the in the hood turn signals along with some of the Scott Drake Under Hood Turn Signal Harness Clip Black Set 1967-1968. Looks great but they are very difficult to seal even over a single wire. Had to order 20 feet and only used about 8 feet. Was going to use sleeves on speaker wires in trunk, but I doubt I will try now. Just too hard to split open and reseal.
Date published: 2019-05-28
  • y_2019, m_11, d_18, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_WHC21, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.81ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 115.18ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;