Aeromotive Fuel Cell 6 Gallon With Brushless Spur 5.0 Fuel Pump And TVS Controller
Highlights
- 6-gallon fuel cell
- Size is 18” x 13” x 13”
- Quality construction
- Great for drag racers
Aeromotive 6 Gallon Fuel Cell with Brushless Spur 5.0 Fuel Pump and TVS Controller.
These 6-Gallon Aeromotive Fuel Cells include in-tank True Variable Speed Brushless Spur 5.0 Fuel Pumps and brushless controllers. Lighter and more efficient than earlier Pro-Series pump models, these fuel cells are ideal for drag racers that require a lot of fuel delivery performance, without much fuel capacity.
Features and Benefits:
- Lighter than the traditional Pro-Series pump.
- Reduced current draw at higher, EFI pressures.
- Extended service life in methanol and ethanol.
- Integral, external brushless controller
- Clean installation, cooler fuel, and enhanced reliability.
- ORB-10 outlet port.
These fuel pumps have an extended service life and are compatible with both methanol and ethanol-based fuels. An integral, external brushless controller is included for clean installation, cooler fuel, and improved reliability.
Aeromotive True Variable Speed Controllers offer the advantage of built-in speed control via a dedicated 0-5V analog DC input signal. The controller capitalizes on existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw. This minimizes motor heat and reduces fuel recycling.
Specifications:
- EFI rated flow of 1700 lbs./hr. @ 45 psi, 13.5 volts
- Carb rated flow of 1850 lbs./hr. @ 9 psi, 13.5 volts
- 90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
- Fuel Injected Engines: GAS
Up to 3400 FWHP – naturally-aspirated
Up to 2600 FWHP – forced air induction
- Carbureted Engines: GAS
Up to 3600 FWHP – naturally-aspirated
Up to 2700 FWHP – forced air induction
- Fuel Injected Engines: E85
Up to 2380 FWHP – naturally-aspirated
Up to 1820 FWHP – forced air induction
- Carbureted Engines: E85
Up to 2520 FWHP – naturally-aspirated
Up to 1890 FWHP – forced air induction
- Fuel-injected engines: METHANOL
Up to 1190 FWHP – naturally-aspirated
Up to 910 FWHP – forced air induction
- Carbureted engines: METHANOL
Up to 1260 FWHP – naturally-aspirated
Up to 945 FWHP – forced air induction
Please Note: Requires straight 12-VDC to the 16-VDC power supply. Not compatible with pulse-modulated systems or fuel pump speed controllers.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Mustang Fuel Tank Area, Mustang Fuel Tank Kits, Restomod Parts
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
