Aeromotive Fuel Cell 20-Gallon With Brushless A1000 Fuel Pump And TVS Controller
Highlights
- Aircraft fuel cap
- ORB-10 outlet port
- Improved fuel flow
- For custom applications
Aeromotive 20-Gallon Fuel Cell with Brushless A1000 Fuel Pump and TVS Controller.
Custom fuel delivery systems frequently require improved performance than standard gas tanks can provide. These Aeromotive 20-Gallon Fuel Cells provide rated flow for up to 1300 HP flywheel horsepower, depending on vehicle configuration.
Features and Benefits:
- Lighter than the traditional A1000 pump
- Reduced current draw at higher, EFI pressures
- Extended service life in methanol and ethanol
- Integral, external brushless controller
- Quieter than the traditional A1000 pump
- Baffled design keeps fuel at the pump inlet
- Fluted pickup with integrated 100-m prefilter
- Integral 0-90 ohm fuel level sending unit
20 Gallon fuel cell size is 31” x 23” x 13”
This 20 Gallon Aeromotive Fuel Cell comes complete with an in-tank True Variable Speed (TVS) brushless A1000 fuel Pump and brushless controller. The Brushless A1000 fuel Pump is lighter than the traditional A1000 pump and reduces current draw at higher EFI pressures.
The brushless A1000 also has an extended service life in methanol and ethanol and is quieter than the traditional A1000 pump. An integral, external brushless controller is included for a clean installation, cooler fuel, and enhanced reliability.
Aeromotive’s True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and reduced fuel recycling.
Specifications:
- EFI rated flow of 700 lbs./hr. @ 45 psi, 13.5 volts
- Carb rated flow of 900 lbs./hr. @ 9 psi, 13.5 volts
- Fuel Injected Engines: GAS
up to 1300 FWHP – naturally-aspirated
up to 1000 FWHP – forced air induction
- Carbureted Engines: GAS
up to 1500 FWHP – naturally-aspirated
up to 1200 FWHP – forced air induction
- Fuel Injected Engines: E85
up to 910 FWHP – naturally-aspirated
up to 700 FWHP – forced air induction
- Carbureted Engines: E85
up to 1050 FWHP – naturally-aspirated
up to 840 FWHP – forced air induction
Please Note: Requires straight 12-VDC to the 16-VDC power supply. Not compatible with pulse-modulated systems or fuel pump speed controllers.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Fuel Tank Area, Mustang Fuel Tank Kits, Mustang Fuel Tanks, F-100 Fuel Tank Area
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Vehicle Fitment
This product will fit the following C10 years:
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
