Aeromotive Fuel Cell With Brushless Eliminator Fuel Pump And TVS Controller

These Aeromotive 6-Gallon Fuel Cells are ideal for drag racers who need serious fuel delivery with minimal capacity. An in-tank True Variable Speed (TVS) fuel pump and brushless controller make this system lighter and more efficient than older models. Current draw at higher EFI pressures is reduced.

Features and Benefits:
- Lighter than the traditional Eliminator pumps
- Reduced current draw at higher, EFI pressures
- Extended service life in methanol and ethanol
- Integral, external brushless controller
- Clean installation, cooler fuel, and enhanced reliability
- Quieter than the traditional Eliminator pump
- ORB-10 outlet port

The brushless Eliminator pump also has an extended service life in methanol and ethanol and is quieter than the traditional Eliminator pump. A True Variable Speed controller offers the advantage of built-in pump speed control. This controller improves on existing brushless technology, reducing fuel flow during low engine demand, and increasing it in proportion to need at the injectors.

Specifications:
- EFI rated flow of 1000 lbs./hr. @ 45 psi, 13.5 volts
- Carb rated flow of 1300 lbs./hr. @ 9 psi, 13.5 volts
- Fuel Injected Engines: GAS
   Up to 1900 FWHP – naturally-aspirated
   Up to 1400 FWHP – forced air induction
- Carbureted Engines: GAS
   Up to 2300 FWHP – naturally-aspirated
   Up to 1700 FWHP – forced air induction
- Fuel Injected Engines: E85
   Up to 1330 FWHP – naturally-aspirated
   Up to 980 FWHP – forced air induction
- Carbureted Engines: E85
   Up to 1610 FWHP – naturally-aspirated
   Up to 1190 FWHP – forced air induction

Please Note: Requires straight 12-VDC to the 16-VDC power supply. Not compatible with pulse-modulated systems or fuel pump speed controllers.