Aeromotive Fuel Cell 6-Gallon With Brushless Spur 10.0 Fuel Pump And TVS Controller

Perfect for racing-use vehicles that require less fuel, these 6-Gallon Aeromotive Fuel Pumps feature a modern design and high-HP capacity. The included fuel pump can support an absurd amount of horsepower as well as various different fuel types, making them perfect for drag racing.

Features and Benefits:
- Lighter than the traditional Pro-Series pump
- Reduced current draw at higher, EFI pressures
- Extended service life in methanol and ethanol
- Integral, external brushless controller for a clean install, cooler fuel, and enhanced reliability
- E85 Compatible, reduce max FWHP by 30%
- ORB-10 outlet port

The Brushless Spur 10.0 Fuel Pump is lighter than the traditional Pro-Series pump and reduces current draw at higher EFI pressures. The brushless Spur 10.0 has an extended service life in methanol and ethanol and uses the new integral spur-gear pumping mechanism. An integral, external brushless controller is included for a clean installation, cooler fuel, and enhanced reliability.

Aeromotive’s True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and reduced fuel recycling.

Specifications:
- 60-PSI continuous operating pressure and up to 100-PSI peak pressure, base plus boost.
- Fuel Injected Engines: GAS
up to 6900 FWHP – naturally-aspirated
up to 4900 FWHP – forced air induction
- Carbureted Engines: GAS
up to 7600 FWHP – naturally-aspirated
up to 5500 FWHP – forced air induction
- Fuel Injected Engines: E85
up to 4830 FWHP – naturally-aspirated
up to 3430 FWHP – forced air induction
- Carbureted Engines: E85
up to 5300 FWHP – naturally-aspirated
up to 3850 FWHP – forced air induction
- Fuel-injected engines: METHANOL
up to 2415 FWHP – naturally-aspirated
up to 1715 FWHP – forced air induction
- Carbureted engines: METHANOL
Up to 2650 FWHP – naturally-aspirated
Up to 1925 FWHP – forced air induction

Please Note: Requires straight 12-VDC to the 16-VDC power supply. Not compatible with pulse-modulated systems or fuel pump speed controllers.