DEI Starter Heat Wrap Versa-Shield 7"x24"
- Withstands Up To 500 Digress
- Universal Trim To Fit Size
- Easy Removal And Installation
- 7In X 24In Dimensions
DEI 7" x 24" Versa-Shield Starter Heat Wrap.
A common concern for car enthusiasts is starter failure due to excessive heat. If this is a concern of yours, don't worry, CJ Pony Parts has you covered. This product is made by DEI, or Design Engineering, Inc., and it is going to be the solution to your problem. Known as the Versa-Shield (010402), this product is a must have for all car enthusiasts, or anyone interested in protecting the life of their starter.
- Withstands 500 degrees of direct heat and 2000 degrees of radiant heat
- Universal-trim length to size
- Easy removal for shows
- Multiple uses to protect master cylinders, cool cans, distributors, fuel pumps and more
- 7" wide, 24" long
This Versa-Shield DEI Starter Heat Wrap is the perfect solution to the car owner who is worried about starter failure due to heat. The wrap is composed of an aluminized heat reflective material backed with hi-temp rated glass fiber insulation barrier. This Versa-Shield heat wrap is capable of reflecting up to 2000 degrees of radiant heat, along with 500 degrees of direct heat.
Installation of this product could not be more straight forward. All you need to do is wrap the desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook and loop edge closure design. One of the biggest perks of using this product is that you usually don't need to remove the starter to install the wrap. Additionally, this heat wrap is universal. Simply install the product in the desired area and trim the excess material. If you are going to show your car somewhere and don't want the starter heat wrap installed for the show, it will be easy to remove. This can also be used for other applications other than starters. For example, you can use this wrap on master cylinders, cool cans, distributors, fuel pumps and on other parts as well.
If you are looking to keep your Ford's engine and exhaust system as cool as possible without spending too much, CJ Pony Parts has a wide collection of DEI products for you to choose from. DEI manufactures aftermarket engine and exhaust cooling merchandise that is designed to help keep performance engines and exhaust systems cool under the pressures and stresses that racing and street performance cars are often put through. If you have a need to cool the rising temperatures in you Ford's engine compartment, make a safe choice and choose a piece of DEI equipment to get the job done right the first time around. CJ Pony Parts has many DEI products below for customers to choose from.
Order a DEI (010402) 7" x 24" Versa-Shield Starter Heat Wrap from CJ Pony Parts today!
Novice skill is required for this installation.
This product will fit the following Bronco years:
This product will fit the following C10 years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: