Ridetech designed the RidePro manual control 4-way compressor system for the budget-minded builder. This kit includes everything you need to control your air springs. The control panel uses two dual needle air pressure gauges and four switches that activate the RidePro air valves. Each air bag will be controlled separately from one another with the four individual switches. Included gauges make evening pressure simple.
Features and Benefits
- Two Dual Needle Air Pressure Gauges
- Switches to Activate RidePro Air Valves
- Control Panel Mounts in any Location
- Three-Gallon Aluminum Tank
- 1/4" Air Line Supplies Abundant Amount of Air
- Model 327 Compressor
- Analog Control Panel
- RidePRO Valve Block
- Three Gallon Tank
- 1/4" Airline and Fittings
Ridetech's universal control panel can be mounted in any location but should be within arms reach. Dual needle gauges help you keep an eye on each air spring's air pressure so you can adjust the springs as needed. Feeding air to the air springs is Ridetech's RidePro valve block. The high-quality valve block features laser-etched port markings and weatherpak wiring connectors. RidePro solenoids use exclusive bubble-tight air valves.
A 3-gallon aluminum tank measures 20-1/2" long and 7" in diameter and can hold plenty of air to take care of raising and lowering your vehicle. Feeding the tank is the model 327 compressor. Ridetech's most popular compressor pumps a volume of 1/2cfm @ 150psi and draws a maximum of 19.6 amps. Connecting all of the units is a 1/4" air line which will supply more than enough air for your vehicle.
*This system can be upgraded to a full RidePro Digital system by adding the Digital controller package and/or level sensors at a later date.