Russell Proflex Hose -6 AN Braided Stainless Steel 3 Feet
- Braided Stainless Steel
- 3 Feet Roll
- For 6 AN Fittings
- 40 Degree F To 350 Degree F
Russell 3 Foot Braided Stainless Steel -6 AN Proflex Hose.
When adding aftermarket components to your vehicle, is it hard to find the correct hoses that will fit your application? Purchase this Braided Stainless Steel -6 AN Proflex Hose from Russell. This hose is designed to replace Carburetor, fuel, and oil lines on your vehicle. So if you’re looking to upgrade the lines on your vehicle purchase this Russell 3 Foot Braided Stainless Steel -6 AN Proflex Hose today!
This Russell Proflex hose is constructed with a stainless steel outer braid that will resists abrasion and corrosion. ProFlex hose has a reinforced chlorinated polyethylene synthetic rubber liner with a nylon inner braid that will not collapse under extreme heat. With that being said, this hose is very flexible and can be installed in tight areas with ease.
- Stainless Steel Covering
- Temperature Range of -40° F to +350° F
- Compatible With all Alcohol-based Fuels, Lubricants and Additives
- 3 Feet -6 AN Hose
- Approved by NHRA for use in Competition
- Hose Size: -6 AN
- Hose Length: 3'
- Maximum Operating Pressure: 1000 psi
- Hose Material: Synthetic Rubber/ Braided Stainless Steel
When plumbing your engine, use what the professional engine builders do and you can get the same championship results. Russell Performance manufactures a complete line of hoses and fittings for fuel, brake, water and oil systems. Proflex Hoses work with all -6 AN adapter fittings. Russell has the top-quality parts you need to get the most out of any performance and restoration project!
Purchase a new Russell 3 Foot Braided Stainless Steel -6 AN Proflex Hose from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Cary: Hi Bill, how are you today? Thanks for having me.
Bill: Sure. Tell us a little bit about Edelbrock.
Cary: Edelbrock has been around since 1938. It was founded out from Vic Edelbrock in Southern California. Back in the day, he started out in midget racing. From there, he expanded on to the Ford Flatheads. One of the first manifolds that he actually created was a slingshot. It's interesting because all it really was, was two- barrel manifold or two-barrel carburetors that funneled down into one base manifold and it looked just like a sling shot. We offer many domestic based products for many applications but really, we have a good coverage of Ford products as well.
Bill: You guys are known for your manifolds, your carburetors. What other product lines that Edelbrock offer?
Cary: We offer very diverse product mix from fuel pumps to carburetors to accessories and those would include air cleaners and valve covers and breathers and those types of things, but really, on the old school stuff, that's where that comes into play. On the modern muscle side of things, we have superchargers. So, when you really want to turn up the wick and get your modern Mustang to move into the future, we can fix you up there as well.
Bill: I know almost all of your products have this amazing USA right in the front here. Is that true for everything you guys make?
Cary: For 95% of the products we make, absolutely. It's made in the USA between Southern California and in Sanford, North Carolina. All of our carburetors are made in Sanford, North California. All of our aluminum products are actually made out in Southern California. We have our own foundry, where we cast all of our own aluminum products. We have our own machining center, warehousing center, where we stock everything in that regard.
There are some of those items that are cold-sensitive type items that refer into air cleaners and such chrome based type products. We make sure on those items that we do not make here in the States that we absolutely quality inspect every item 100%, to make sure that you're getting a quality product from Edelbrock.
Bill: Excellent. What kind of new products you have coming down the pipe?
Cary: New products that we have coming down the pipe really revolve around our E-Force Supercharger Kit for the Mustang. We actually have figured out that horsepower levels are not what they used to be. A 500-horsepower kit used to be the number. That's what everybody wants.
Bill: That's standard.
Cary: That's standard protocol. But now, everybody wants more. We're actually coming out with the Stage 2 kit for our E-Force that's actually going to allow you to have a higher horsepower version. It's not going to be 50-Statel legal, but it will give you that extra kick in the pants that will really compete with some of the other competitors that are out there, and that's on the new side.
On the old side, we actually have a E-Street EFI Kit that has a self-learn style, throttle body injection that you replace your carburetor with, to give you a better startup, drivability and mileage increase.
Bill: Excellent. Thanks for taking the time to visit, we appreciate it.
Cary: I appreciate it.
This product will fit the following Bronco years:
This product will fit the following C10 years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: