Wilwood MC4 Mechanical Park Brake Caliper 4-3/4” Mount Driver Side For 0.70”-0.81” Thick Rotors

Swap out the dysfunctional e-brake caliper in your vehicle for a Wilwood MC4 Driver-Side Mechanical Parking Brake Caliper with 4-3/4” Centered Mounting Holes! To enhance strength under load, this cable-operated caliper combines its die-cast body with a forged billet anvil. This lightweight caliper is pre-fitted with noise-dampening shields to prevent bothersome rattling; additionally, brake pads with a high static hold are included for convenience. Available in your choice of color, this sleek caliper is finished in a high-temp, brake-fluid-resistant powder coat for long-lasting protection against the elements.

Features and Benefits:
- Accepts 0.70”-0.81” thick rotors w/ 11.00”-14.00” diameter
- Driver-side caliper w/ 4.75” centered mounting holes
- Die-cast body w/ forged billet anvil for ultimate strength under load
- Comes with high-static-hold brake pads
- Pre-fitted with noise-canceling shields
- Steel bracket included for convenient mounting
- Lever cartridge can be clocked in 3 positions, easing cable routing
- Dust-booted piston keeps moisture/debris out
- Caliper fitted with a cable return spring
- Manual adjuster requires no special tools
- High-temp, brake-fluid-resistant powder coat
- Available in your choice of color
- Manufactured in the USA

This caliper can easily be adjusted without the use of special tools to compensate for pad and rotor wear. To aid in the installation, this product is fitted with a cable return spring, comes with the proper mounting bracket, and features a lever cartridge that can be clocked in 3 positions. This caliper has an aluminum piston that is dust-booted to shield against moisture and debris. Proudly fabricated in the USA, this caliper is perfect for those with 0.70” to 0.81” thick rotors.

Vehicle Fitment:
- 1965-2023 Ford Mustang
- 1948-1979 Ford F-100
- 1966-1977 Ford Bronco
- 1960-1987 Chevrolet C10
- 1988-1998 Chevrolet/GMC C/K

Tech Tip: The mechanical lever accepts 0.310” diameter barrel-ended parking brake cables.

Please Note: This parking brake caliper is side-specific. This part number is for the left-hand side only. If both left and right sides are needed, see P/N 12069-V.