This is the ultimate Ford Performance Coyote engine block. Into it's third generation, this Coyote engine block (M-6010-M52B) is specifically engineered for high horsepower builds. If you want your Coyote to have some serious teeth, this is the foundation you need.
The water jackets around your cylinder bores are reinforced with extra material, helping to prevent block failures common with high-HP stock block setups. The intake side of the bore at the deck surface includes a cast-in brace for stronger cylinder walls and improved head gasket sealing. Longer head bolts provide additional clamping force for your heads. Improved crankcase windage reduces the friction your rotating assembly will experience across the rev range. This block also features an arc spray weld liner coating, which improves block durability and heat transfer, reduces friction, and lowers weight compared to previous 5.0L Mustang GT aluminum blocks. 94mm cylinder bores are finish honed and ready for assembly, as are all other block features - including head deck and crank bore. Main bearing caps made of nodular iron and cross bolted for additional strength. Rod bolt paths are clearance machined into the crankcase to improve tolerances. The block also has provisions for high flow oil squirters to keep your pistons cooler and better lubricated than a stock block. This Ford Performance engine block (M-6010-M52B) includes plugs and dowels, and oil squirters.
If you can't accept anything but the best for your high horsepower Mustang or Coyote powered project, Ford Performance will get you playing with the right blocks.
Features and Benefits
- Reinforced for high horsepower
- Reduced friction and weight
- 94.0 mm bore
- Made in Canada
- All block surfaces finished
- Better heat transfer and oiling
- High flow oil squirters
- Includes plugs, dowels, and oil squirters