Ford Performance Control Pack for Gen 4 5.0L Coyote Crate Engines with M/T
Highlights
- PCM Uses Ford Calibration
- Eliminates Cable Route Issues
- Replaces Stock Body Harness
- Includes HEGO Sensors
Ford Performance Control Pack for Gen 4 5.0L Coyote Crate Engines with a Manual Transmission.
Demystify the wiring process for your Gen 4 5.0L Coyote crate engine with the help of this control pack (M-6017-M50HM)! This pack is designed for use in the custom installation of Ford Performance part number M-6007-M50H in applications with a manual transmission. It features a PCM with unique and expert calibration by Ford, placing performance at the forefront. They simultaneously eliminate cable routing issues and pre-emptively aid troubleshooting by integrating an ETP and OBD-II port respectively.
Features and Benefits:
- Intended for use with Ford P/N: M-6007-M50H
- Designed for custom vehicle installation
- PCM uses unique Ford Performance calibration
- Electronic throttle pedal (ETP) eliminates cable routing issues
- OBD-II port for trouble-shooting/code-reading
- Supplied harness replaces stock body harness
- Includes power distribution module, HEGO sensors, & airbox
- Upper & lower radiator hoses
- Air inlet tube supplied
The control pack’s harness replaces the stock body harness, making installation easier without cluttering your setup. It also comes with a power distribution module, HEGO sensors, and an airbox to spare you the hassle of buying separately. As for the radiator hoses, both upper and lower hoses are included plus a tube for the air inlet.
Vehicle Fitment:
- 1965-2024 Ford Mustang
- 1966-1977 Ford Bronco
- 1948-1979 Ford F-100
*For models with a Gen 4 5.0L Coyote crate engine
*MUST have a manual transmission
Additional Notes:
- The control pack is NOT intended for use with any production F-150 or Mustang Coyote engine. Installing PCM in any production Mustang will result in a no-start condition.
- Supercharged versions, modified engines, and modified applications will require custom calibration.
- Requires return-type fuel system.
California Residents: Proposition 65 Warning
Related Categories: Mustang Wiring Kits, Bronco Wiring Kits, Restomod Electrical & Wiring, F-100 Restomod Electrical & Wiring, F-100 Wiring Kits
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
- 1988,
- 1989,
- 1990,
- 1991,
- 1992,
- 1993,
- 1994,
- 1995,
- 1996,
- 1997,
- 1998,
- 1999,
- 2000,
- 2001,
- 2002,
- 2003,
- 2004,
- 2005,
- 2006,
- 2007,
- 2008,
- 2009,
- 2010,
- 2011,
- 2012,
- 2013,
- 2014,
- 2015,
- 2016,
- 2017,
- 2018,
- 2019,
- 2020,
- 2021,
- 2022,
- 2023,
- 2024,
