Ford Performance Crate Engine N/A Aluminator XS 12.0:1 Compression Mustang 5.2L 4V DOHC 2015-2017

Ford Performance:
M-6007-A52XS

Highlights

  • Manley H-beam Connecting Rods
  • Dual 65MM Bore Throttle Body
  • 47 LB Fuel Injectors
  • Cobra Jet Tuned Intake
MSRP $22,599.00
$20,199.99
You save 11%

Ford Performance N/A Aluminator XS 5.2L 4V DOHC Crate Engine with 12.0:1 Compression for 2015, 2016 and 2017 Mustangs.

This Ford Performance N/A Aluminator XS 5.2L 4V DOHC Crate Engine with 12.0:1 Compression from Ford Performance takes the technology and hardware from the Shelby GT350 and puts it into this naturally aspirated, 5.2L cross-plane crankshaft engine. With 580 horsepower, the Aluminator XS is the most powerful naturally aspirated engine ever developed by Ford Performance! Each and every one of these engines is hand-assembled at the Ford factory by the same techs that build premium Cobra Jet drag racing engines, so you know it'll be perfect and powerful sitting inside your new pony. Premium aftermarket components like Manley connecting rods, ARP rod bolts and Mahle forged pistons make this the best engine available in today's market.

Features and Benefits:
- Mahle Hard Anodized Forged Pistons with Graphal Low Friction Coating
- Unique Manley H-beam Connecting Rods with ARP2000 Bolts
- Ford Performance Forged Steel Cross-Plane Crankshaft and Shelby GT350 Cylinder Block
- Shelby GT350 Oil Pan with Integrated Windage and Slosh Baffles
- Cobra Jet Tuned Intake
- Dual 65MM Bore Throttle Body
- 4-Valve Per Cylinder Shelby GT350 Fully CNC-Ported Aluminum Heads with Roller-Finger Camshaft Followers
- Low-Leak Rate Variable Cam Timing (VCT) Phasers
- Robust Primary Timing Chains as used on Shelby GT350R
- 47 LB Fuel Injectors
- High RPM Pulse Ring
- Blue Coil Covers with Added Badging
- Zero (0) Heat Range Spark Plugs
- 200 amp Alternator and Front Engine Accessory Drive (FEAD) Kit
- Engine Mount Bosses and Bellhousing 4.6L Modular Mount Pattern

*2015-2017 Mustang GT electronics-custom calibration required.
*Requires premium unleaded fuel only.
*The Cobra Jet Tuned Intake Manifold will not clear production 2015-2017 hoods without modifications.
*Does Not Include Engine Harness, Flywheel/Flex Plate or Exhaust Manifolds.

Camshaft Specs:
- Intake camshaft - 14mm lift / 270 degrees duration
- Exhaust camshaft - 14mm lift / 270 degrees duration
- 580 Horsepower
- 445 FT.-LB. Torque
- 5.2L - 317 Cubic Inches
- 12:1 Compression Ratio

Tech Tip: Custom PCM calibration required when installing crate engine in all vehicles including 2015-2017 Mustang.

Please Note: The vehicle harness and PCM is not included. Purchase Ford Performance PCM and installation kit is designed for street rod/project car installation. Can also be equipped with an automatic engine harness and then used in conjunction with automatic transmission controls pack

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.