Holley VR2 Fuel Pump Brushless with Controller

Unlock your vehicle’s full potential with the VR2 Brushless Fuel Pump by Holley (12-3000)! Engineered for both intensity and endurance, this pump ensures your engine is fed with the help of precision-tuned fuel delivery. Designed to support both carbureted and EFI fuel systems, this product is a superior choice for a wide array of vehicles. Crafted from robust aluminum followed by a sleek black finish, the VR2 boasts not only impressive performance but also striking aesthetics. Its sturdy construction guarantees longevity, allowing you to push the limits of your vehicle without worry. Boasting a 335 GPH flow at 13.8 volts, this fuel pump guarantees powerful fuel delivery even under the most demanding scenarios. 

Features and Benefits:
- Universal Fitment
- Designed to work on race cars and daily drivers
- For carbureted and EFI fuel systems
- Capable of 130 PSI 
- 335 GPH at 13.8 Volts
- Compatible with E-85, gasoline, and methanol
- Dual-pump technology 
- High flow and high pressure with low amperage draw
- 38 maximum amp draw
- (2) controllers for both pumps
- A low-speed control for low fuel consumption
- A full-speed control for high fuel consumption
- Can be fully submerged in the fuel cell or chassis
- Aluminum construction
- Black finish

Its E-85, gasoline, and methanol compatibility ensures your vehicle is race-ready or street-suited, regardless of your preferred fuel type. Achieve remarkable heights with a capability of 130 PSI, all while maintaining a low 38-amp draw. This perfect balance of high flow and high pressure coupled with low amperage draw optimizes fuel consumption without sacrificing performance. The VR2's dual-pump technology ensures your racing needs are met at all times. With two controllers for both pumps, you can effortlessly switch between low-speed control for conserving fuel and full-speed control for maximizing fuel delivery during racing scenarios. Designed for flexibility, the VR2 can be fully submerged in the fuel cell or mounted on the chassis, providing you with secure installation!

Specifications:
- LPH 1250
- 16 AN O-ring inlet
- 10 AN O-ring outlet
- 9.5” long, 4.75” wide, 2.75” tall
- 18.5-Volt Compatibility
- Supports 4400 EFI or 4800 Carb HP

Additional Notes:
- These pumps do not have an internal bypass.
- A bypass-style regulator and return line are required.
- The only correct fitting is a contoured port fitting with an O-ring.
- Compatible with methanol and E-85 for competitive drag race use only.