KBS Coatings RustSeal Satin Black Stop Rust Paint Quart

KBS Coatings formulated the Satin Black Stop Rust Paint RustSeal to be a ceramic-like barrier that protects rust-treated areas on your vehicle from the air. This will prohibit the rust from returning. The satin black gloss level will cover a 50 square feet surface area without peeling or flaking thanks to the flexible (expandable) formula.

Features and Benefits:
- High Surface Tolerance that Applies Directly to Treated Rust
- Non-Porous Single Component Formula with High Solids Content
- Satin Black 70-75% Gloss Level
- Forms Permanent Non-Porous Barrier Against Moisture and Oxygen
- Waterproof Coating Strengthened by Repeated Exposure to Moisture
- Mold, Mildew, and Chemical Resistant
- Withstands Temperatures up to 600°F (316°C)

The waterproof and oxygen-blocking coating stop rust from ever starting and prevents mildew or mold build-up, too. This solution can be applied by brush, roller, or from a spray bottle, and adheres non-porous immediately.

*A quart of RustSeal will cover 50 sq. ft. with two (2) coats.

Please Note: RustSeal is not intended for use as a final finish. Repeated or prolonged exposure to direct UV light will cause cosmetic alteration to its color and sheen. RustSeal’s guaranteed rust protective properties, however, will not degrade. In areas not exposed to direct UV light, like the underside of a car, RustSeal will seal as well as serve as a great-looking final finish. To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque (solid color) paint system. Please note that a clear topcoat cannot provide the needed UV protection. Choose the closest color associated RustSeal primer to compliment your topcoat and protect against potentially visible surface chips.