Ridetech Ride Height Sensors RidePro-HP Kit For RidePro E5 Pressure-Based System

If your vehicle currently uses a RidePro E5 pressure-based system, this Ridetech RidePro-HP Ride Height Sensors Kit (30400036) from CJ Pony Parts is the ultimate upgrade!

Features and Benefits:
- Works with RidePRO E5 pressure measurement for ultimate pressure and height accuracy
- Heavy-duty ride height sensors
- Bendable linkage rods with rubberized rod ends
- Weatherproof connectors and wiring harnesses
- Can be added onto existing pressure-only system installations

This Ridetech RidePro-HP Ride Height Sensors Kit is designed to measure both pressure and ride height on your vehicle! It will establish ride height and spring balance (loads) by comparing the ride height sensor's position to the air pressure within each air spring. It also levels the vehicle without cross-loading. This is essential for situations with sudden directional changes, panic stops, and high performance driving because combined pressure and heights systems can easily handle these kinds of load changes.

Included with this Ridetech RidePro-HP Ride Height Sensors Kit (30400036) are four (4) ride height sensors, four ride height sensor linkage kits with bendable linkage rods and rubber rod ends, a group harness, 1/4" sensor bolts with Nyloc nuts and flat washers, mounting tabs, heat shrink tubes, and an installation guide. The connectors and wiring harnesses are completely weatherproof. Installation is quick and easy thanks to the included parts and installation guide!

Please Note: RidePro-HP sensors can only be used in conjunction with RidePro E5 Digital Control System.

Vehicle Fitment:
- 1965-2021 Mustang
- 1960-1987 Chevrolet C10
- 1948-1979 Ford F-100