Wilwood MC4 Mechanical Park Brake Caliper 4-3/4” Mount Passenger Side For 0.99”-1.10” Thick Rotors
Highlights
- For 0.99-1.10” Thick Rotors
- Superior Strength Under Load
- Composite Metallic Brake Pads
- Black or Red Powder Coat
Wilwood MC4 Passenger-Side Mechanical Parking Brake Caliper with 4-3/4” Centered Mounting Holes for 0.99”-1.10” Thick Rotors.
Restore your vehicle’s dilapidated e-brake caliper with a Wilwood MC4 Passenger-Side Mechanical Parking Brake Caliper! Featuring 4-3/4” centered mounting holes, this caliper is perfect for models equipped with 0.99 to 1.10-inch thick rotors. The caliper’s die-cast body and forged billet anvil boost its strength under load. For a smooth initial response and superior fade resistance, this caliper comes with composite metallic brake pads with a low wear rate. This product is pre-fitted with noise-canceling shields to eliminate rattling and allow for quiet operation. Finished in a high-temperature powder coat, this caliper is available in your choice of color to give your ride a hint of style.
Features and Benefits:
- Accepts 0.99”-1.10” thick rotors w/ 11.00”-14.00” diameter
- Passenger-side caliper w/ 4.75” centered mounting holes
- Die-cast body w/ forged billet anvil for ultimate strength under load
- Composite metallic brake pads w/ smooth initial response
- Pre-fitted with noise-canceling shields
- Steel bracket included for convenient mounting
- Lever cartridge can be clocked in 3 positions, easing cable routing
- Dust-booted aluminum piston keeps moisture/debris out
- Caliper fitted with a cable return spring
- Manual adjuster requires no special tools
- High-temp, brake-fluid-resistant powder coat
- Available in your choice of color
- Manufactured in the USA
This cable-operated caliper uses an aluminum piston that is dust-booted to protect against debris and moisture. To offset pad and rotor wear, this product can easily be adjusted without the use of special tools. This caliper is fitted with a cable return spring, comes with a mounting bracket, and features a lever cartridge that can be clocked in 3 different positions to ease the installation. To top it off, this caliper is proudly constructed in the United States.
Vehicle Fitment:
- 1965-2023 Ford Mustang
- 1948-1979 Ford F-100
- 1966-1977 Ford Bronco
- 1960-1987 Chevrolet C10
- 1988-1998 Chevrolet/GMC C/K
Tech Tip: The mechanical lever accepts 0.310” diameter barrel-ended parking brake cables.
Please Note: This part number is for the right-hand side only. If both left and right sides are needed, see 15484-V.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Brakes, Mustang Brake Calipers, Ford Bronco Parts, Ford F-100 Parts
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following C/K years:
- 1988,
- 1989,
- 1990,
- 1991,
- 1992,
- 1993,
- 1994,
- 1995,
- 1996,
- 1997,
- 1998,
This product will fit the following C10 years:
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
