CRL Windshield and Window Sealant Glue-In Tube

CJ's Part Number:
79% of 100


  • High Quality Sealant
  • For Windshields/Glue-In Glass
  • Simple Caulking Gun Install
  • Dries Black
MSRP $11.00
You save $0.01

Tube of CRL Windshield and Glue-In Window Sealant.

If you need to keep a windshield secured, consider this Tube of CRL Windshield and Glue-In Window Sealant from CJ Pony Parts!

Features and Benefits:
- Requires a simple caulking gun
- Dries black
- Secures windshield in place
- Use on any glue-in style door/window glass

This sealant can be used on First Generation Mustang windshields as well as on any glue-in style door glass or window glass. The sealant requires a simple caulking gun to be used properly and will dry black, leaving your windshield or windows securely in place. CJ's recommends three tubes to complete install on one vehicle, but smaller projects will require less. The high-qualtiy sealant can be used on practically any make or model of vehicle and will help keep the glass tight and securely in place. Browse around and pick up all the restoration parts and pieces your project might need now from CJ's!

Learn how to seal the windshield on your 1965-1968 Mustang in this helpful guide!

Vehicle Fitment:
- 1965-1968 Mustang
- 1960-1986 Chevrolet C10

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're here with a replacement windshield weather strip, fitting all 1964 through 1968 Mustangs. This heavy duty weather strip will fit Coupes, convertibles and Fastbacks. It's designed to be installed on the glass itself, before the glass is installed in the vehicle.

When ordering windshield weather stripping, you want to make sure you have at least 18 feet of a nice nylon string, the window wield caulk (two tubes are recommended), as well as a strip caulk for proper installation. Start by installing the weather stripping on the glass, which will go in this channel right here. This is a pressure fit channel, so there is no sealant necessary. Just put the glass right in. Once you have the glass installed in there, you want to open up this rear channel back here. In this channel, you want to put the strip caulk in and then the string and that's how you're going to install it on your vehicle.

Once it's installed in the car, you use the window wield tube to go around the whole outside to seal it properly. Our windshield weather stripping is sold separately. It's also available in our complete Mustang weather strip kits.

Vehicle Fitment

This product will fit the following C10 years:

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.