FiTech Ultimate LS Intake Kit 1000HP Short Runner Without Trans Control LS3/ LS92/ LSA

Experience the power of the FiTech Ultimate LS 1000HP Short Runner Intake Kit(70030), designed specifically for LS3, LS92, and LSA engines. Crafted with a low-profile design and fabricated from sturdy 3mm thick aluminum sheet metal, this intake kit combines high performance and durability. The TIG welded construction ensures premium quality, while the 102mm inlet and 1500-6500 RPM power band have the potential to deliver up to 1000 HP to the flywheel. With 24X and 58X crank and cam compatibility, this intake kit provides a comprehensive range of fuel and ignition options for optimal engine performance.

Features and Benefits:
- Low profile intake manifold
- 102mm inlet, fabricated 3mm thick aluminum sheet metal TIG welded
- 1500-6500 RPM power band up to 1000 HP to the flywheel
- 24X and 58X crank and cam compatible
- Two programmable fan control outputs
- TPS, IAC sensor, and knock sensor control
- Tach output driver for most tachometers (5V)
- Output driver for most speedometers
- Compatible with car and truck coils
- On-the-fly programmable target AFR and timing (if desired)
- Billet fuel rails with AN fittings and fuel crossover
- Self-learning ECU with touchscreen controller
- Dual Bosch wide band with dual trim control
- Sequential fuel and spark control with individual cylinder trim
- 3 BAR MAP sensor automatically detects up to 30 psi boost
- Custom wire harness (uses factory coil pack sub harness)

The FiTech Ultimate LS Intake Kit is equipped with a self-learning ECU and touchscreen controller, making it easy to monitor and modify for peak performance. Dual Bosch wide band with dual trim control and sequential fuel and spark control provide seamless adaptability to your engine's needs. Additional features like programmable fan control outputs, TPS, IAC sensor, and knock sensor control allow for a tailored experience to suit your preferences, while the 3 BAR MAP sensor accurately measures air pressure changes.

Kit Includes:
- 102mm billet aluminum throttle body
- Hand-held controller with color touch screen and cable
- Windshield mount for touch screen controller
- LS ECU
- 80 lb./hr. injectors
- High-volume fuel rails
- Mounting bracket
- -6 AN fittings
- Screws to mount brackets
- AN fittings and fuel crossover
- Fabricated 3mm thick aluminum sheet metal TIG welded intake manifold and bolts
- Plug-and-play primary wiring harness
- 3 BAR MAP sensor
- Throttle position sensor
- Idle air control motor
- Idle air temperature sensor
- Dual wide band O2 sensors
- Stainless oxygen sensor bung kit (clamp or weld on)
- Two programmable fan control outputs

Tech Tips:
- 102mm high flow cable operated throttle body sits at 7 degrees
- Throttle body will clear any stock truck accessories depending on the type of water pump
- If there is truck water pump accessory clearance interference you will need to get a new water pump bracket
- Intake manifold will fit Rectangle Port LS3/L92/LSA cylinder heads
- If a throttle body cable mounting bracket is required, use P/N: FI70063

Vehicle Fitment:
- 1965-2010 Mustangs
- 1948-1979 F-100s
- 1966-1977 Broncos
- 1960-1987 C10s