Product DescriptionFloor to Firewall Extension for 1965-1970 Mustangs.
Also called a "toe-board", this sheet metal extension piece connects the front of your floor pan to the bottom of the firewall. This is included with the firewall panel. Dimensions are 18"x22".
*Will require slight modifications to fit 1967-1970 Mustangs.
- Overall Rating: 2 / 5
- 4 Reviews
As mentioned in other reviews requires excessive work to make fit on 68-70. Some contours aren't even present, and those that are present are off by roughly an inch from where they need to be. Hope it fits better on earlier Mustangs. Would strongly advise AGAINST this product for my 68-70 friends.
The top portion of this panel does not fit well around the opening for the steering column and the speedo cable. Though saving as much metal as I could on the firewall and some persuasive hammering on the panel I finally got a passable fit on my 69 coupe.
requires extensive hammer and dolly work around column and tunnel only use what u need may work better on 65-68 but not real easy to fit on 69-70 metal is good quality and plenty thick
These do require modification for cars with torque boxes. And the contours around the top where it meets the firewall were not particularly close for my 69, especially around the steering column firewall mount and speedo cable opening. It required a lot of hammer/dolly work in that area. The outer edge (left side on a drivers toe-board) has a lip that is bent frontwards that will have to be reversed or simply cut off to fit over where the upper torque box meets the rocker. Also, easiest to cut it in half to do the work. Leave as much good metal on your car as possible and just trim the new toe-board to replace only the damaged areas, which for me were the area immediately between the upper torque box piece and the toe-board.