DEI Exhaust Wrap Titanium 1” X 15’ Single Roll

If you're looking for a top-quality exhaust wrap to increase the thermal reliability of your vehicle, look no further than the 1-inch by 15-foot single roll of DEI Titanium Exhaust Wrap (10128). This wrap is tough enough to withstand 1800°F of direct heat and 2500°F of intermittent heat, reducing temperature and vibration breakdown while promoting increased exhaust flow for improved performance. Made from pulverized lava rock, this wrap is ultra-pliable for a tight and secure fit, and it comes in a hi-tech carbon fiber look that will give your vehicle an added edge. With no need to pre-wet the roll or apply a DEI HT silicone coating, installation is a breeze. Additionally, thanks to the wrap’s high resistance to abrasions and oil spills, you can be sure you’ll be protected for years to come.

Features and Benefits:
- Made from pulverized lava rock for increased thermal reliability
- Withstands 1800°F of direct heat and 2500°F of intermittent heat
- Promotes increased exhaust flow for improved performance
- Reduces temperature and vibration breakdown
- Extremely pliable for a tight and secure wrap
- DEI HT silicone coating not required
- Pre-wetting roll not necessary for wrapping
- Hi-tech carbon fiber look
- High resistance to abrasions and oil spills
- Made in the USA

Additional Notes:
- Wrapping of the catalytic converter is not recommended, as overheating can lead to a reduced lifetime of the converter. Instead, create your own shield using Floor & Tunnel Shield II™ (DEI50501).
- Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex pipes or flex joints.
- DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as flexible heat shields.